Auto Cutter Epson 630K
settings
side of the printer to enter the receipt as the behind of the front is assured.
first facing the front of the printer to the right of the press expression transferred to the position of playing, you first see whether the printer automatically cuts the paper is consist in ...:
1: Turn off the power button;
2: While holding down two buttons on the right front of the printer, hold down and hold the 2 buttons open by the same power, this process should be for 5 seconds, let work afterward 5 seconds,
GHD IV Black Straighteners, the A4 paper into front of the printer.
3: After printing the A4, take a see whether cutting open automatically, whether it is open then you can turn off the power.
4: If the automatic cutter is off then apt the left of the new status, press the 1st button double, press the medium button double apt corner off the power to complete the action.
First, open the automatic cutter features
1, turned off, press and clutch / back key + Pause button, boot (boot only lax, not extra than 3 seconds). This time is set into the function. The first sheet prints out the current setup instructions.
2, press the line button, print out the careful setup instructions.
3, press the line button, choose Settings function, second from right above (value 2) is sewn to skip pages, from right right light (value 3) is a cutting function.
4, press the feed button, right light is in the negate worth, the value of the right second light namely in the affirmative.
5, shutdown,
GHD IV Dark Straighteners, namely is, save the settings.
Second, custom paper
set and rolling into the paper size from 1 to the descriptions. Reference to this blog's custom paper.
http://hi.baidu.com/jiaguoxinzhi/blog/item/4ca1b5cb4ed6aafa52664feb.html
Third,
GHD Classic Straighteners, the definition of cutting position
1, the boot print status
2, reception the pause 3 seconds into the fine-tuning.
3, line / feed adjusted situations.
4,
GHD Green Butterfly 2011, press the pause button Save.
Fourth, the definition of top
general default, you tin no set.
1, the boot publish status
2, press the pause button
3, press the back of paper, according to feed,
GHD IV Mini Straighteners, automatic adjustment of page top.
4, blank header, generally set at microprocessor software. If you have set, press the pause 3 seconds into the fine-tuning.
5,
GHD IV Straighteners, accommodate the header vacant.
6, press the pause button Save.