20 category of PS Technology

an photo name: send up photos soft blue and yellow - a simple way,
1, open the incipient matter, reception Ctrl + J to copy the background layer a layer, point channel panel, select the blue outlet, image> apply image, layer for the background, mingled to Multiply, opacity 50%, RP tick,
2, Back to the Layers panel, create a curves adjustment layer, and blue channels: 44,182, red channel: 89,108
3, create a new layer, fill it with black blend mode to Multiply and Opacity to 60%, choose the Elliptical Marquee Tool middle selection, press Ctrl + Alt + D Feather, a value of 70, and then double-click the Delete key to delete, resort to the text, complete the last effect.


Second, the photo name: bring up photos smart red and yellow,
1, open the original material, Ctrl + J to copy the background layer a layer, press Ctrl + Shift + U to the color, the implementation of : Filter> Fuzzy> Gaussian Blur, digit 4, for the color filter layer blending modes, layer opacity to 27%.
2, establish a current layer, press Ctrl + Alt + Shift + E ticket layers, layer blending mode to color. 3, build a gradient map correction layer, violet - orange, Alt + Ctrl + G with clipping mask.
4, create the brightness / contrast adjustment layer, -5, -21
5, create a Smart Sharpen adjustment layer, set to the default value, number 46, radius 0.8, Gaussian blur,
6 , create a Levels adjustment layer, 8,1.00,255
7, the color adjustment layer to create an optional, Red: +17, -8, +16,0, yellow: -54,0, +10, + 18, white: -5,0,0,0,


3 photos name: bring up nostalgic landscape photos,
1, open the original copy layer
2, curve adjustment, numerical RGB: 109,99
3, hue saturation, value: 0, -39,0
4, color balance , values: 0,0, -34
5, optional colors, neutral colors: 0,0, -20,0
6, a new layer, fill d7b26c, layer mode overlay, opacity 56 %,
7, the smokes pull material into the chart, into the original top, soft light layer mode, the outside portion of the sky in appending to wiping out, back layer (Ctrl + Alt + Shift + E)
8, optional color, black: 0,0, -14, -5
9, a new layer, fill 0d1d50, excluding layer mode, copy a layer, filling 52%
10, curve adjusted value of RGB: 128,155
11, color balance, value: +24, +7, -64, filling 70%
12, gradation, value: 29,1.00,227, filling 58%
13, optional colors, independent colors: +16, +12, -11, +5
14, back layer (Ctrl + Alt + Shift + E), color balance, value: +24, +7, -64, filling 38%
15, back layer (Ctrl + Alt + Shift + E), opacity 46%, filling 48%,
16, Ctrl + E Merge Visible, Click


4 sharpening, photo Name: young people deal with the delicate skin out,
1. Duplicate the background layer. Filter - Blur - Gaussian blur radius to 10.
2. set the layer blending mode to Double-click the layer name to open the right mixture of options. In the Advanced Mixed, repeal perfected R and G channels,
3. Use of the color balance of the image curve, according to the picture to decide
4. Create a new layer, select the mend Brush (J), select layer specimen. Freckles or blemishes on the massive, sham cleared.
5.ctrl + shift + alt + E, stamp all layers, tick the skin part, you can choose their own access, I favor the pen tool, merely you can also use the Polygonal Lasso tool, to Note that to handle with the skin, so to remove the eyes, eyebrows, lips, nostrils. Anti-selection (ctrl + shift + i) delete the addition to the skin, excess parts.
6. Filter - Blur - Gaussian Blur with a radius of 20. Set layer opacity to 75%
7.CTRL + J, duplicate the layer 3 filter - Other - High Pass radius of 4, mixed mode to >

five photos Name:
1. Open the original image, copy the biggest contrast of the blue channel,
2. and then use Levels to further increase the contrast, the purpose is to equitable let the stone have layers
3. to adjust the good blue Copy to copy the layer inside the channel and to add the color you ambition, I used the deep orange
4. to copy the red channel to the base map layers, using masks to remove the sky and stone, leaving only the grass and to add color with the Gradient Map
5. Open the material lightning pellet, copy the contrast of the red channel to have the largest file
6. Select the layer blend mode to Overlay and adjust the situation and size, making it a light source, remove some needless things (to resolve), then use the radial blur filter to handle it radiation, granted the formation of the beam emitted
7. to copy the bottom map of the red channel inside the channel, enhancing the contrast, so that The high light some of the grass revealed more clearly, and then select the layer of high optical part of the paste inside, with white fill, layer mode to Overlay, and then use the mask to remove the white part of the sky, leaving merely part of the grass, the grass appears to be glare of light
8. Select the mask layer 1 and then invert the selection, selection by the sky, adding curves and hue / saturation adjustment layer to adjust according to private favorite and the naturalness of the color you like
9. Finally, some posters add units to the real entity looks counterfeit posters, in the use of color, I try to choose the gold to the color of decorative and stones, so that colors vary between reverberate


six, photo title: sea beach,
1. Open the original, the new layer (Ctrl + Shift + Alt + N), and then stamp apparent layers (Ctrl + Alt + Shift + E),
2. into the channel, copy the relatively muscular likened the green channel, and then increase the contrast, white white, black, black, or with a brush (overlay mode) Ctrl + Green channel copy, extract constituency
3. the sky material delay in, create masks, wiping the figure
4. establish layer, soft light mode, to make the sky look better,
5. to do the water reflection, Ctrl + T vertical flip, create masks, with a brush to draw your lusted , Multiply mode effect better, for plans vary,
6. color, adjust according to personal habits, good use of the optional color,
7.Shift + Ctrl + Alt + E, stamp shown in Figure layer, layer mode Multiply, and then mask the darker corners of oppression, mainly for the water pressure of the dark, make the picture more balanced,
8. Filter - Noise - Add Noise, number 3, Gaussian distribution, color, make the characters and the same grainy sky,
9, the last fill the sky material


VII Photo Name: PS effects in turn hand-painted photographs,
1. Open the original document, according to their own sense of color adjustment via the adjustment of the film, and dermabrasion, dermabrasion value not too much, (Neat image plug-in)
2. a new layer, color FEE7D6, (along to the color film characters set), layer mode to Overlay 25%, 20% with a brush in the face and cervix skin and light coating,
3. features of the careful go, cutting out the mouth, the emergence Copy (Ctrl + J) with coated tools were applied lips, so that the skin becomes soft and smooth lips (not too much strength)
4. Create a new layer to the lips and face paint, the color is FDC1D6, layer model color in the lips and face with a brush for painting the side,
5. with the Dodge tool, the range is the high light exposure of 25% to draw the high-light some of the lip, with better tools, the range is the middle of the 20 exposure %, compared to enhance lips,
6. a new layer, color 8E1A25, 3 pixel brush to paint the inside lane, and then draw 2 pixels outside the lip lines (high-light part of the mask line Jian Dodge more)
7. on the nose to circle the emergence, reproduction, use painting tools to be moderate around the nose cultivated, and then use the Dodge tool range is a high light exposure of 20%, strengthening the high-light the next part of the nose, then use the color 422B2D, a 2 pixel brush to draw the outline of the nose (if short lines to make up for using better tools for the next)
8. eclosion circle replication of the eye brows, eye brows with the smudge tool around the soft skin thinning, and then use the Dodge tool range is a high light exposure of 15%, strengthening the high-light parts under the eyes, with better tools the middle range and deepen the lines around the eyes,
9. coated tools used to apply some fine eyes, look softer, with some better tools to promote black eyes, with the Dodge tool range is a high light exposure 20% of the degree to reinforce the high-light part of the eyes, making eyes look brighter,
10. color 080,101, 3-pixel brush, draw the lashes part (line Dodge tools to deepen the color depth can be used to make up) can also be used eyelash line paths and other ways triggered,
11. with smudge tool to apply the prettier eyebrow, his brow slightly darker color of the rough spots that smear back along the disappear down, and then 2 pixels with a brush to draw eyebrows in the front eyebrow lines, the eyebrows more structured,
12. smudge tool to choose the hair brush, (according to hair texture to set brush shape), applied the process to be applied along the texture of the hair, not too much compel to apply the uniform,
13. hair brush applied partly to the normal interface, the (hair must be applied cautiously)
14. Draw the hair texture to a new layer, layer mode to overlay, select the pencil pixels to 1 (the value resolved according to the size of character images), color, hair texture for the DFDFDF draw down smooth lines
15. horsetail some select brush tool, brush easily with a fork some of the draw onward the texture, color, pattern layer on,
16. Create a new layer, the customary mode, select the brush tool, pixel 1, opacity 60%, 80% of stream, color is white, draw dynamic forehead hair,
17. clothes and necklaces with the smudge tool applied some of the softer, and then select the Dodge tool with a range of high light , exposure 20%, clothes and necklaces to enhance some of the high-light
18. Synthesis, sharpen the picture as a whole, sharpening is 8, with the Dodge tool to highlight some of the little processing, the overall color correction, the ( can be modified to add some background light, highlighting the theme)


eight, photos Name: post-look Raiders,
1. Open the file, copy a layer copy of the
2. Select the replica layer at free transform to change the shortcut keys ctrl + t to make the roles extra slender face fashion
3. by Merge Layers (ctrl + e), the use of cutting tools so that the screen contains the new essay, cut off the more part,
4. Image - Adjustments - Color: Red - 70, -20, -20, -50. yellow - 40, -20, -30, -80. white -0,0,0, -50. intermediate colors -0, -5, -5, -5
5. by curve (ctrl + m) adjust overall color, RGB full channel - output 214, input 174 and blue channel - output 131, input 124,
6. Image - Adjust - Color Balance (ctrl + b), the shadow -10,0, +15. Highlight - 10,0, +2.
7. With a seal tool to evenly cover the skin around the mouth,
8. With a pen to circle dark bags under the eyes and face, the emergence of 60, the curve to lighten the constituency Dodge bags under the eyes and reduce the wording of facial muscles do not loosen,
9. continued emergence of 60 constituencies, the curve lightening, the face, full point, output 146, input 113.
10. the high part of the circle of light out, feathering 60
11. curve of lightening, the face, full point, output 138, input 118.
12. eyebrows, the eyebrows and top of the circle with the skin, the lasso tool, the emergence 5, copy the layer, the Duplicate the layer move down, in array to attain eyebrow shaping effect, stamp eyebrow shaping, this must be very thoughtful
13. began to adjust the eyes, the Commission put out the eye part of the circle, copy layer
14. pen to circle the do eye shadow region, copy a layer, the curve of pressure dark color to adjust,
15. then uniform color eye shadow, color balance (middle tone): +50,0,0. (Shadow): +20,0,0,Women's Minnetonka Moccasin,
16. The details of color adjustment, the upper eyelid 1 / 3 part of the Hue and Saturation: 0, -40,0
17. Circle the details of the basis of the upper eyelid eyelashes Department before the corner of lower eyelid 1 / 3, press DELETE key to delete the selection, the exposed high light-bit,
18. delete some more eye shadow, feather 40
19. circle the details to the upper inner turn eyelid 1 / 2, press DELETE key to delete the selection, the exposed high light-bit
20. the eyes ring out, copy the layer, emergence 1, part of desaturation whites, mottled back, Hue Saturation: 0 -50,0
21. whites details of the adjustment, curves adjustment to increase the light,
22. eyes after the curves adjustment layer of bright copy, pen brush back the first part of the left eye, showing some shadows, p>
23. remove the pupil part
24. with eyes the color curve adjustment, so that the same
25. plus see high light
26. circle the lips, emergence 2, Curves lips high light, adjust the lips Color
27. adjust the nose Liang Gaoguang, adjust shadow highlights
28. with the optional color palette as a whole, the middle color -0,0, -2,2.
29. Yanping Heng fine-tuning the use of color, (high light): 0,2, -2.
30. liquefaction along the hair pull, combined with lens flare, light 182,35 mm focus,
31. Finally, insert a flash in the appropriate brush complete


IX, 1. sketched with a pen on the back of a pinion shape,
2. in the new working catalogue into the path 1, double-click the work path.
3. the route into a selection (Alt + Enter), copy the layer, emergence 3 pixels,
4. filled with white, select the appropriate intensity of use of painting tools, apply the appropriate edge.
5. Duplicate the layer, filled with differ color that can be differentiated Layer 1, Layer Properties regulating transparency Oh,
6. in accordance with the method of creation of a second in front of the wings, adjust the transparency of the right can black and white gradient adjustment layer and mask adjustment,
7. new layer and draw a circuitous selection using the brush circle in the constituency, then adjust the transparency,
8. Copy paste into the new background layer The Alpha-channel, in other places outside the top left corner of the black filling, use the Filter - Blur - Radial Blur: number 90, blur method: zoom,
9. Select Alpha channel (the channel holding down Ctrl), in Figure floor area new layer, fill light yellow,
10. with a pen generated beam path, the path into a selection, yellow and white gradient fill color,
11. adjust transparency, rub with the eraser at the bottom of the light is light becomes the normal,
12. People who sketched with a pen light in the path, the path into constituencies strokes with a painting in the edges, adjust transparency, combined with the eraser and smudge tool will achieve better results and spend more Several halo effect will be better -
-

ten, 1. to find a fold of the background, drag the photos will need to make the background layer, resize and harvest, border and background to make it mate,
2. Adjustment - Hue and Saturation, full map : -35 saturation, brightness +10,
3. adjustment layers into a soft mode, the effect of the antique photos out,
4. hue saturation, full size: 0, -80,0
5. Duplicate Layer, Hue and Saturation - color: 340,24,0
6. create a new layer on top, fill it with black,
7. Filter - Noise - Add Miscellaneous color, increase the old sense of the number of 25%, Gaussian distribution,
8. Mixed Mode to Multiply,
9. Image - Adjust - RP,
10. ambition go to the boundary of variegated out, with the rectangular selection tool to select the inside edge of the frame, DEL key to erase the silhouette part of the variegated,
11. clashes with the eraser tool around the motley characters -
-

XI, 1. Duplicate the layer, into the channel, copy the red channel, a copy of the red channel curve adjustment, input 100, output 3,
2. with a brush or selection tool to fill the white diagrams and flowers,
3.Ctrl + click on the red copy to make it into a constituency, remove red copy of the return to the Layers panel,
4.Ctrl + C copy, Ctrl + V paste, figures and flowers matting completed,
5. Method One: New Fill Layer, R = 255, G = 128, B = 173, the layer to color mode,
6. Method Two: saturation of coloring, the new hue saturation adjustment layer, retard before coloring, Hue = 345, Saturation = 60, lightness = 0, the new curves adjustment layer, 237,255; 188,130
7. Method three: New color balance layer,Children's Minnetonka Moccasin, the middle tone - Levels : +100, -54, -20 / +100, -35, +43
Shadow - Levels: +11, -7, +3. New optional color adjustment layer, red: 0, +21, -23, -5. Magenta: -100, -45, +32, -1
8. gradient mapping application, new Gradient Map 1, the layer to Color -
-

second, 1. Open the original image, duplicate the layer, filled with pure black, overlay mode.
2. New Hue and Saturation layers: Saturation -85.
3. New Brightness and Contrast layer: contrast +10,
4. New optional color, red: 0,Minnetonka Moccasins Boots, +30,0 , +100. Yellow: 0, -15, -100,0. Intermediate color: 0,0,0, +5.
5. Stamped Filter - Render - Lighting Effects: points of light, intensity 21, Focus 24, shiny 0, the material 69, 0, exposure, environment 8,
6. chop, add text decoration -
-

xiii, 1. Duplicate the layer, Filter - Blur - Radial Blur: number 71, blur means - zoom, quality - good,
2. create templates, struck a car, then tarnish clashes cycle dynamic,
3. Levels - optional colors. Add material, rendering the whole atmosphere, the details of adjustments made with the Dodge, the main diameter of 5, the hardness of the smallest -
-

XIV, 1. in the RAW to adjust the brightness, contrast, etc., for laying the foundation behind the adjustments,
2. to connect the sky material, simple transparency, make the sky into the layer,
3. New Adjustment Layer, Selective Color - Neutral Color: +20, +6, +7, -4, utter, a little water color uniform,
4. khaki color fill, opacity 54%, dark blue color fill, 61% opacity, fill deep purple, opacity 76%,
5. fine-tuning, high light and adjust the selection in the middle of the resulting mask, high-light selection method: Calculation - Source 1: The combined map layers layer, the gray channel, the source 2: The layers merge layers, gray channel, Multiply mixed, opacity 100%.
6. midtones selection method: Source 1: Merge layers, gray channel, the source 2: Merge layers, gray channel, Multiply mixed, opacity 100%.
7.RGB get inside the mask channel, with a curve adjustment, high light adjustment: the black box on the left in the penultimate line of the middle line, blue line to the cut point, the middle tone adjustment: Up to adjust some,
8. reflected light mask, lasso select constituency, emergence, overall provides bright,
9. ship debris reduced saturation, saturation: -36,
10. sharpening the overall -
-

fifth, 1. Open the image duplicate the layer, Ctrl + Alt + ~, by constituency, emergence 3-5. curve brightens, about 18,0
2. Adjust levels: 25,1,20, 245. mask the main characters and the details given rise to some
3. stamp on the characters to brighten the edge of the sharpening modified dermabrasion.
4. on the back layer for color equilibrium, the navel notes: -12, -10, -13. high light: +8,0, -19.
5. back layer, into the LAB mode,
6. Create a new layer, Shift + Ctrl + N, soft mode, transparency 30-40%,
7. the petition of the image on the new layer, layer: mingle layers, soft mode, transparency, 100%,
8. adjustment layer to adjust the curve on the lightness channel, 5,0
9. on the LAB color image saturation, hue adjustment, full size: 0, +10,0. Yellow: 0, +35,0. Green: 0, +15,0. Red: 0, -20,0. Blue: +10, +30,0.
10. into Levels: 20,1.20 , 245. on the lightness channel to adjust the gradient in the mask with a round out at the chief characters, and then brush clashes details.
11. stamped, return RGB color, the image is optional color options, red channel: 0,0,0, -30 given rise to the petals on the mask,
12. stamp, the new blank layer, sprinkling with white brush to increase effects of pen pressure. 100% hardness, spacing, +54% -
-

XVI 1. Duplicate the layer, soft light mode, the use of soft layers is optimized for
2.Ctrl + U hue saturation adjustment, the color of the leaves with a fodder draw, the hue of the change has been reached Transform the season, we need the feeling of winter to find leaves hue, brightness adjustment will be the most light.
3. Note lightness tolerance beneath which the details of the slider, you can select constituencies reduced saturation, hue can also be used to amend transparency, here is the color range, closing duplicate the layer, with the background layer to color range.
4. constituencies and returned copy layer selected, emergence, for the selected part of the saturation of 0,
5. snow consciousness of the figures in the anti-choice, you tin use the color range, you can also use the hue saturation, and finally join contrast, wiping out some clothing.
6. some little rigid snow, superimposed on the snow to be opaque, with the contrast in the copy layer selected, change the overlay mode, copy the layer beempty of contrast,
7. the overall rate of a contrast with perspective about clashes between a large brush, not including figures, giving details of the snow. -
-

Seventeen, 1. Duplicate the layer, adjust brightness, contrast, down the merger,
2. into the LAB mode, select the image of the image, enumerated,
3. the layer mode to color, stamp layer,
4. into the RGB channel, filled with black and blue channels to extract the green channel selection, will fill the selection with white,
5. Hue and Saturation, Red: +20, +1,0 . cyan: -7, +26,0. other data does not move, the layer mode to color,
6. into the RGB channel, select the green channel selection, anti-choice, color balance adjustment layer, Select the middle tone, value: -10, -6, +16. Shadow: +4, +5, -2. high light: -19, -26, -40
7. back layer, into the RGB channels, Select the red channel selection, copy, glue it back to RGB mode, layer mode to color, select the curve adjustment layer, the red channel: 173,193. Red channel: 58,56. Green Channel: 180,201. Green Channel: 53,58. Blue Channel: 55,62.
8. The layer mode to color, copy the layer, copy the map layer, the layer mode to brightness, transparency, 20%
9. Select the adjustment layer, hue saturation, blue: +5, -49, -2.
10. adjust the color balance adjustment layer, middle notes: -6,0, +3. Shadow: -7, +3, -1.
11. color balance, shadow: +4, +5 , -2. Shadow: +4, +5, -2. High light: -19, -26, -40.
12. Plus speedy effect. -
-

eighth, 1. create Hue Saturation adjustment layer, saturation -49,
2. to establish an optional color layer, red: -49,0, +7,Women's Minnetonka Ankle, -41. Yellow: 0 0,0, -23
3. to establish the Hue / Saturation layer, brightness -49
4. Colors. Yellow: 0,0,0, -26. White: 0,0, +46,0. Intermediate colors: 0,0, -6,0.
5. Optional color. Red: 0,0,0, -48. Black: 0,0, -47, +5. Transparency down to 37%
6. Stamped, noise reduction, sharpening, painting and simple to use tool to repair the knee approach The smudge,
7. plus hidden corners, making a heart-shaped selection, emergence, with the curve provides bright. -
-

nineteenth, 1. copy the layer is converted to Smart Filters, to effect the purpose of adjusting the filter can
2. Filter - Render - Lighting Effects, all light sources, negative 17, Matte -25, plastic effect 100, underexposure 32, negative 28,
3. New optional color adjustment layer, red: -100, -3,03,0. Yellow: -59, -6, -23, +1. green : +9, +5, -100, +27. cyan: +8, -76, -3, -100. White: +1, -40, -73, -10. Intermediate colors: +16, -18, -18, -3. Black: 0,0,0, +28 -
-

twenty, 1. slightly adjust color actors, adjusting a rough tone, establish Levels Adjustment Layer, Levels all channels: 0,1.35,255. Levels of red channel: 0,0.85,255. Levels Green Channel: 0,1,10,255 Levels: 0,0.95,255
2. To establish the Hue / Saturation adjustment layer reduces the saturation of original, Full Figure saturation -30
3. to create a Photo Filter adjustment layer, the 1st step in the blue has bring an end to ... with this step to deep yellow, the concentration of 25%, mode mode, the original place where the dark darker, choose the Channels palette, clutch down the ctrl points of red channel, get back to photos selection populate the black mask filter.
4. to establish an optional layer of color adjustments, red: 100, -33,100, -40. Yellow: 0,0, -40,0. White: +15,0, +20, +20
5. The windows brighten the more, the establishment of the Hue / Saturation adjustment layer to part in the window and wipe. Hue 260, Saturation 25, Lightness +75
6. To create a color balance adjustment layer, to distinguish the characters and the surrounding surroundings, the set after the mask used in the large soft black brush to figure as the megalopolis angle rub a morsel on it. Levels +20, +20, +40, select midtones
7. establishing Levels adjustment layer, the first Ministry of dark and light general points out, the mask using the gradient tool to pull a black and white, black and white from the top right to bottom left corner of the gradient, to the right at present. Full channel 0,0.80,255
8. Add light, use the , the upper left corner a bit dark, so add a mask to wipe out the upper left corner. Points of light, strength: 28, Focus 52, gloss -100, materials 100, 17 exposure, environmental 32
9. Create a new layer back, look at light and dark contrast to enhance the establishment Levels adjustment layer in the mask gradient tool with black and white drawing, from the upper left to lower right corner of the black and white gradient, the upper right corner of the light is entirely obscure the part of the mask with a white brush in the brush out, and then figure out from the mask in the brush. Levels all channels. Levels full channel: 0,0.80,255
10. Sharpening, a little dermabrasion, add the word to complete. -
-

the twenty-first, 1. the new gray finish, with a curve to adjust the brightness, 152,124
2. cutout eyes and mouth, to be stressed,
3. reduce the overall saturation, saturation - 56
4. with a color overlay to the overall color of the proclivity,
5. conceal the hue and color overlay layers, and open access panel,Women's Minnetonka Slippers, copy the R channel,
6. Create a new layer paste, and use color filter pattern adjust the transparency -
-

XXII, 1. Open the original image, copy the layer, the image - adjust - to color
2. filter - Artistic Effects - Plastic packaging, according to reduce the transparency of the original
3. adjust the black level The Levels, is the picture black and white, color scales: 88,0.27,192
4.Ctrl + Alt + ~, high light extraction layer black and white constituencies, money becomes small eyes, invisible layer back to the background,
5. to obtain in front of the high-light culling modify the curve, pulled the altitude of the bend, the efficacy came out
6. adjust the sunshine contrast of the background layer, increase, or an appropriate adjustment to the color, brightness +4, Contrast +7-
-

xxiii, 1. Open the original image, copy the layer, the image - adjust - to color
2. filter - Artistic Effects - Plastic packaging, according to reduce the transparency of the original
3. adjust the black level The Levels, is the picture black and white, color scales: 88,0.27,192
4.Ctrl + Alt + ~, high light extraction layer black and white constituencies, money becomes small eyes, hidden layer back to the background,
5. to get in front of the high-light selection adjustment curve, pulled the top of the curve, the effect came out
6. adjust the brightness contrast of the background layer, increase, or an appropriate adjustment to the color, brightness +4, Contrast +7-
-

round, 1. Select the blue channel
2. channel mixer, anchor the
3. resurfacing, landscaping figure form.
4. to give people the skin and clothes with parameter default; use after the effect of blue, also need to use the
6. to the effect of step 6 are mixed mode to
8 ..
9. fine-tune the look or facial skin color, brightness, contrast, and some of the details.
10. produced as shown in the
12. to the
13. The -
-

XXV, 1. to create a new layer, filled with yellow, overlay mode, numerical 247,240,197
2. Copy just the yellow layer, Linear Burn mode, the mask given rise to the yellow motorcar to avert the car had the color yellow,
3. adjust brightness, contrast, high light part of the normal subject of color and exposure, brightness -20, contrast +64, the new adjustment layer saturation, saturation -31. to determine the sunshine of the the final brightness to high light at the color and detail preponderate in the dark can be ignored,
4. Duplicate the background layer the shadow highlight adjustment to the most shadow detail as the base in place, the shadow: the number 100, color length 33, radius 102 High light: the number 0, the tone width 50, radius 30, to adjust: +20 color correction, contrast adjustment between 0 and 0.01% of the construction of black, white construction 0.01%
5. Duplicate the background layer to adjust the sky brightness, with the layer make up for absence of overexposure sky,
6. tuning the details, to delete the sky wires, repair, Clone brush will do,
7. Flatten image, fine-tuning the details, sharpness -
-

XXVI, 1. buckle out of character, adjusting photo color, contrast and redundant attention to the photo did not make light of the thighs in place need to be adjusted
2. adjustment of rind color, clothing color, mainly used adjustable layer, then add the background material, reflection, etc., disburse care to mini feet down the extend deformation is used Free Transform to adjust drip
3. in the legs add a little high light, high light pen outline the rank, filling the white - - Gaussian Blur --- reduce transparency, you can also fill the new 50% gray layer --- --- prototype soft draw with the Dodge tool, numerous roads guiding to Rome, can easily approach the destination
4. material, the text with a press, the final sharpening can -
-
-
- xxvii, 1. the photo opens, ascertain some form similar to the castle.
2. will be deducted from the house and put a new layer. You can use the Polygonal Lasso tool to select housing, and through a relatively soft eraser tool to erase the background.
3. immediately need a new background, from the material library to pick a
4. the sky into the rear of the house (air layer into the housing layer under), and add a little perspective deformation effects of the sky to increase the depth of the background.
5. scrutinize the corner of the house, there still remain some of the original color of the sky above.
6. with the sorcery wand select the regional housing ground space, and then do Select> Modify> Expand directive to inflate the range of adoptions, enter an appropriate value of the selection to comprise the need for color correction house edge. Executive Image> Adjust> Hue / Saturation bid to adjust the color of the edge of the roof the same color.
7. continue to use the Hue / Saturation to adjust the housing and the color of the sky to empower them to coordinate feasible integration.
8. will must remove the palm trees next to the house, with the copy stamp tool to copy the house to draw tiles among the part of the ground and first floor.
9. add to a lock of lightning added to the screen tension. No pluming effect using the brush to draw a bolt of lightning, copied to a new layer,Minnetonka Boots, add the flicker effect. Then use the Dodge tool to highlight the roots of lightning clouds.
10. using hand-drawn pictures or around the house to add some die tree, remember to adjust the color and brightness.
11. To make the house look more worn, painted on the roof of a chasm.
12. Continue to add the effect of damage. Broken beams and aqueduct, to damage distinct roof and glass. To wreck things and then copy the stamp tool to use to fill the place vacated
13. Add some stains. First, the skylights, with an abnormal brush to add some variegated cup. Then alteration the layer blend mode stain it with a nice glass can be mixed attach. I used this tutorial brightness mode.
14. on the whole house to reiterate the same steps, using a little deeper color and blend mode set to overlay mode. Attention to seams and edges, this place is the maximum prone to stains.
15. porch amplified detail.

xxviii, 1. into the channel panel, and then use the Opacity 50%
Channel Green - Mixed Multiply, opacity 20%
channel red - miscellaneous dingy, opacity 100%
2. adjustments - color balance - high gloss - Levels: -8 , +13, +11
3. blue channel during the first application image, layers: Background - Mixed: Multiply, Opacity 50%,
4. with curve adjust the brightness, move the top right of the red channel a little bit,
full channel 6,0 and blue channels 4,15
5. Copy a layer copy of the out of the blue channel of the operation again, mixed Multiply, opacity 50%
6. Finally to do is highlight the characters, and with the eraser, given heave to some folk, pay attention to the appropriate lower transparency. -
-

twenty-nine, 1, this effect can be directly transferred with curves out over the entire channel is approximately 1 / 4 grid,
-105.125 green channel, blue channel 151.254
2. with lens correction to add black borders . Add Noise, which vignetting - the number of -28 (dark), the focus +5,
3. with the brush tool on the Internet under a pen scratch about in the above picture and then merge the layers
4. Add Noise, amount -2.45
5. to do a side -
-
-
- thirty, 1. Duplicate the layer blend mode to Screen,
2. Coated 2 eyes mask reverse clashes
3. back (alt + ctrl + shift + E )
4. channel mixtures, select the color, red +54, Green +54, Blue +32
6. Mixed Mode - are stacked
7. on the back layer to adjust the image - Adjustment - Shadow / Highlight - Shadow: 50,50,144
lofty light: 0,50,30
Midtones: 20,0
0.01,0.01
8. again back
9. wipe away the right impudence with the stamp of the sun
10. with the Dodge tool - the range of high light intensity of 50%, given rise to the eye reflection, only rub the eye black,
14. for a long period less saturated red hue, or other fine-tuning to attempt

xxxi, 1. Duplicate the layer, the overall provides bright, curved top right,
2. with a selection tool to circle the snout and nails, and then brightens with curves to highlight the nose and fixes
3. color balance - high gloss - Levels: +8,0, -22
midtones - Levels: -10, +29, +27
Shadow - Levels: -2, -3, +14
4 Colors - Red: 0, +1, +23, -29
Available colors - Yellow: 0,0, +4, +28
5. adjust the affected skin, slightly Pressure dark colors
6. with a curve to highlight the texture of the tank pressure of dark, black is the mask, the mask with an adjustment with a good common rectify that
7. brighten the overall color, top right of the curve,
8. Finally, the lips of the revision,
9. add text -
-
-
-
xxxii, 1. use the
2. using ctrl + I RP operation:
3. Levels using ctrl + L to adjust values ​​for [145,1.5,160]
4. transferred into the general layer, after a new blank layer and fill it with black on the bottom.
5. using ctrl + T to free transform, the use of perspective.
6. duplicate this layer, and use the free transform the vertical flip.
7. aline the two layers, and connect together.
8. use the Free Transform to adjust the zoom function of elevation.
9. use the color filter


have to remember that 20 category of PS technology! ! ! The United States will no do your photos! ! !

a easy digital photo retouching
1 open late pictures, like the implementation of color / saturation (-40) to decrease saturation.
2 new layer, the layer mode to soft light, with the brush tool will need to polish the part of the painting several times, where you can easily extract the color palette used
3 pictures soft color transition is not enough, then about the implementation of the emulating Gaussian blur filter (+85)


simple with photos came to light less than
1 Open the image, copy the background layer, change the background color filter layer pattern
2 Levels of the background layer to adjust

30 秒 get Plmm elegant photos
1 Open the picture, copy the background layer double
2 for reproducing the background layer a Gaussian Blur (radius 4 to 6), copy the background layer to the second mode of light
3 new layer, add filling pattern (half of pre-defined gray well and half white horizontal stripe pattern), set Mixed Mode to Multiply

image dislocation effects
1 Open the picture, a new layer, select the View - the potentate, select the migrate tool, respectively, from the top and base tug out 2 blue signal (9 compartment)
2 using rectangular selection tool, fill the carton (dark gray 1,9, 5,7 black, 3 light gray) to psd format, and then near the file
3 implementation filter - misrepresent - the replacement, select the retention psd file
Notes (the corresponding image pixel to the left and ascent; black (color value = 255) is the largest affirmative transmission, that is the corresponding image pixel to the right and down; gray (color value = 128) does not generate transmission )

shading effects
1 Open the photo image, Select - Select All, then Edit - Copy, construct a new channel, Edit - Paste to paste the copied images into the new channel ]
2 implementation of the image - adjustment - Anti-like, back to RGB channel, amend - remove, delete the original image
3 to Select - Load Selection, phone the new channel, Executive Editor - fill (the color )

atomization
1 Open the picture, a new layer, set foreground / background color (black / white), to Filter - Render - Clouds, add a layer the layer Repeat masking
2 filter - render - clouds, image - adjust - brightness / contrast (80,0, a mode to color filter layer)

People illustrator effects

1 Open the image, copy the background layer, the implementation of the image - adjustment - Channel Mixer (Gray, +30, +60, +10, monochrome), to Filter - Stylize - Find edges, remove the rumpus
2 Levels of mixed mode to , +155) the implementation of form, color image communist
4 - adjustment - optional color, fine-tuning of color (red, 0, +100, +100, -75; yellow, 0, -40, +100, - 40)

old photos using the color overlay to add light and color effects
1 Open the image, copy the background layer, the implementation of the image - adjust - to color, adjust brightness / contrast (-42, +18 )
2 Add Halo (brightness +100)
4 Duplicate the background layer, additional again,
1 Open the photo and copy of a The layers in the replication of a mouse, the sky turned blue

dispose selected according to the shadowy Art
1. copy an original layer (Ctrl + J).
2. Gaussian blur on the copied layer Filter (+4.0).
3. do color adjustments (+50,0, -64)
4. obliterate with a soft-edge eraser explicit need fall butme.
5. the proper use of Figure mixed layer.

create hazy in bright (scenery, ecological type)
1 Open the image, copy the layer.
2 copies of the layer blending mode to reducing the transparency.

a photo to add a glass effect
1 selected place, press Ctrl + J
2 Gaussian blur on the shear layer (+3.1 pixels).
3 to adjust color balance (-39, +29, +16).
4 new layer. Choose the thickness of the glass area add a custom gradient filling (black and white gray, the order is dark, glossy, dark, high light), press Ctrl + T on the constituency to adjust the thickness of the glass.
5 filter - distort - Glass , select your preference pattern (distortion, smoothness of 1, zoom 50%).

flaming paper effect of the old photos - PS handling $
1 pure open a picture, the implementation of image - Adjustments - Hue / Saturation (+1, -58, +1).
2 Image - Adjustment - change (mid-tones, deepen yellow, deeper red highlights).
3 Duplicate the background layer, Go to Filter - Texture - motes (9,56, perpendicular).
4 new layer, the implementation of the filter - Render - Clouds.
5 and flee the image - adjust - brightness / contrast (+27, +100).
6 with the Magic Wand, select one layer of black constituency.
7 off layer of a preview, click Copy the background layer, the foreground color to dark brown.
8 to Select - Modify - Expand (5 pixels), select - Feather (5 pixels)
9 Edit - Fill (foreground), the selected layer one, with the magic wand select the background of black constituency
10 off layers and layers of a preview, copy the background layer elected, Executive Editor - Clear.
11 image - canvas size, height / width of one centimeter was increased, positioning (in).
12 opened the background layer preview, select the background layer and fill the foreground color (light brown).
13 Duplicate the background layer selected, do Layer - Layer Style - projection. (positive end laminations, 45% opacity, angle 45, from 7 to expand 2%, size 10).
14 merge all layers.

Art piebald effect of another system of law
1 skeleton to create a new file key fill background by D White
2 Next, filters --- --- performance clouds.
3 CTRL + M to adjust under the curve (high contrast black and white).
4 After completion of the effect of beyond next filter - distort - Glass (7 Distortion, smoothness, 3, texture - canvas, zoom 50%).
6 Create a new layer, the background is black, the additional a new layer, add ample white rectangle.
7 located in the rectangular layer on the implementation of filter - distort - replacement, select the default option. Then find the newly saved PSD file can be replaced.

PS rendering the atmosphere of your photos (landscape)
1 Image - Adjust - Levels (RGB +29,1.0, +234) . form, color Doctrine l2wvg.V 'T @ 4I
2 implementation of the Hue / Saturation command (full size -14, +41, -1).
3 continue to Hue / Saturation (ruddy, hue merit decreased , saturation boost).
4 continue the hue / saturation (yellow, -22, +45, -1). www.swcool.commDZ-u
5 continue to Hue / Saturation (green, + 15,0,0).
6 adjust the brightness / contrast (brightness reduce / increase contrast). Xingse doctrine (H {T2P4ccN

simple and easily sketch effect

1 Open the picture, do to the color, adjust brightness / contrast (brightness decrease / increase contrast).
2 Duplicate the background layer (Ctrl + J), select the background layer, the implementation of Filter - Style - find the edge, then the UXXXXX sharpening, then
layer mode to Overlay.
3 new layer, fill the white, add noise, then the film blur, the layer mode to Multiply.
4 rubber tools (opacity to 15%), wipe some of the high light.

strokes drawn sketch effects
1 Open an image, Duplicate the background layer, select Layer 1 copy to Filter - Blur - Gaussian blur (2.0 pixel)
2 Duplicate the background layer again, select Duplicate Layer 2, the implementation of the filter - limn - watercolor pen ( 20,60,80), the layer blending mode to darken.
3 Duplicate the background layer again, select Duplicate Layer 3, the foreground color to red, to Filter - Sketch - Sticky Notes ( 25,7,10), opacity set to 30%.
4 Duplicate the background layer again, select Duplicate Layer 4, the foreground color set to black, foreground / background color set to black / white, and the implementation of Filter - Sketch - Photocopy (1,50), the Executive Levels adjustment (RGB, 157, .0,159), filled with the value of 30%.

simple way to do special photos
1 Open a picture.
2 selected the blue channel in the channel, and then in the blue channel to Filter - Stylize - overexposed, you can point back to the RGB channel.

Matrix effects
1. Create a size of 500X300, RGB mode, the white background periodical.
2. with a text input tool for channeling 01 randomly enter a code, press CTRL + T to put it over the vertical circulation, and a few multi-copy a pull into the range size, placed at promiscuous a few. Another method is to use filters, you can achieve very good results. Is the menu - Filter - Texture - particles, the intensity and contrast are adjusted to 100, particle type selection vertically on it.
3. To those 01 code all the text layer and merge the background layer, and the foreground color set to R: 100, G: 255, B: 0 hardly ever green, the background color set to black.
4 Select Menu - Filter - neon light effect, luminous size set to 10, brightness to 15.
5. Select Menu - Filter - Stylize - light edge, the edge width is set to 1, the brightness set to 20, about the smoothness set to 1.
6. Select the menu - Image - Adjust - Brightness / Contrast , the brightness to -10, the contrast adjusted to about 60

Ps The bathing process is used to flush negative slides, it would be relatively strange and interesting colors. If the MM portrait photograph, will make even filled with a decadent decadent avant-garde colors.
1 Open the image, and let the right shows channel, into the channel, into the channel, into the Select favor the panel selected the red channel, into the .
8 control panel in the channel entire the RGB channel selected, go to all the RGB channel selected, go to