one, the way to avoid users press the F8 key to enter the Superior Boot Choices? change the registry to perform?
A: Very first, to display that, in prompts the consumer to press F8 to load the registry is not it, so nothing to perform with the registry. Tip F8 is the first Windows startup files loaded Ntldr, someone modified the file abroad, it is easy to download the following variations 2000 and XP:
then open the DOS window type attrib c: ntldr - s-h-r, after which copy ntldrnof8 (or ntldrnof8xp) to the proper location and identify ntldr. Then add attributes attrib c: ntldr + s + h + r.
restart the system, press the F8 essential findings happen to be ignored.
2nd, methods to patch package integrated to the Windows installation files in Windows? (WinXP SP2 parameter unique)
A: In addition to Windows XP SP2 utilizing the following strategy from outdoors the patch:
1, use WinRAR (or run compressed package deal add-x alternative) to unzip the patch offer to a short-term directory (say d: spx);
2, the Windows installation files ( the whole disc, not only i386 directory) duplicate for your tough drive to a temporary directory is assumed to become d: windows;
three, run d: spx i386 update the update.exe, make use of the parameter - s: d: windows;
4, pop-up window displays the progress of your operation has finished d: windows directory the source file has been integrated inside the patch package deal.
5, you are able to use WinISO for any class of software program that re-create these files into ISO files, along with a bootable CD by copying the boot sector in the methods to create a bootable CD-ROM (for particulars begin to see the practice WinISO data).
update the parameters are as follows:
update [-u] [-f] [-n] [-o] [-z] [-q] [-l] [-s: ]
-u Unattended mode
-f to force other purposes to shut at shutdown
-n Do not back again up files for uninstallation
-o to overwrite OEM files without prompting
-z Do not restart soon after the set up is total
-q Tranquil mode (no person intervention)
-l checklist put in patches
-s: the Support Pack files into
for Windows XP SP2, the original has grow to be the-x parameter / integrate: a, fullpath will be the complete route from the supply files are located.
III, Regedit.exe and Regedt32.exe What's the difference compared to, which one ought to I use?
A: In the various variations of your working method is really unique, the subsequent I had been introduced:
one, in the Windows NT three.x, Regedit.exe may be the 16-bit Windows working method up editor. It truly is used to modify the Windows registration database. This database is located inside the Windows directory, the title is Reg.dat. Database consists of information and facts about 16-bit apps of info, document management Used it to open and print files. Supports Object Linking and Embedding (OLE) purposes also use this database. WOW (Windows on Windows) and 16-bit Windows applications use and preserve the Reg.dat. Layer inside a virtual DOS machine WOW (VDM) layer. Regedt32.exe could be the configuration editor for Windows NT. It's utilised to modify the Windows NT configuration database, or Windows NT registry. This editor allows you to view or modify the Windows NT registry. It gives that sections on the registry (called hives) may be the window watch. Each window displays two sections: the left is that the registry crucial folders. The correct is associated with the selected registry key value.
2, in Windows NT 4.0 and in Windows 2000, Windows NT four.0 and Windows 2000 Regedit.exe is integrated mainly to be able to use its search perform. You may use Regedit.exe to change Windows NT four.0 and Windows 2000 registry, but not Windows NT 4.0 and Windows 2000 all the capabilities or information sorts can use it to watch or edit. Windows NT four.0 and Windows 2000 is integrated in the Regedit.exe edition in the following restrictions:
• can not set the security for registry keys.
• can not view, edit, or search for the two values REG_EXPAND_SZ and REG_MULTI_SZ information varieties. If you try to watch the REG_EXPAND_SZ value, Regedit.exe displays it like a binary data sort. If you try to edit either of these data kinds, Regedit.exe saves it as REG_SZ, and the information sort no longer performs its intended function.
• You could not save or restore the registry entries for the hive file.
Microsoft recommends that Windows NT 4.0-based computer or Windows 2000 when making use of Regedit.exe only for its search capabilities.
Regedt32.exe is a Windows NT four.0 and Windows 2000 the configuration editor, used to modify the Windows NT configuration database, or Windows NT registry. This editor makes it possible for you to watch or modify the Windows NT registry. It delivers that sections on the registry (referred to as hives) will be the window view. Every window displays two sections: the left is the fact that the registry important folders. The correct is connected with the chosen registry important worth. Regedt32 is a powerful tool, use it to change registry values must be careful. Values within the registry is missing or incorrect set up of Windows will cause the technique can not use. Various with Regedit.exe, Regedt32.exe does not support the registry key file (. Reg) import and export.
3, in Windows XP and Windows Server 2003, Regedit.exe is the Windows XP and Windows Server 2003, Configuration Editor, to modify the Windows NT configuration database, or Windows NT registry. You can use this editor to see or modify the Windows NT registry. It supports the security settings of registry keys, support for viewing and editing REG_EXPAND_SZ and REG_MULTI_SZ, and to support saving and restoring hive files. The left with the folder that registry crucial. The best is associated with the selected registry key value. Regedit is a powerful tool. Use it to alter registry values should be careful. Values in the registry is missing or incorrect installation of Windows will cause the technique can not use. Regedt32.exe is a small plan, only to run Regedit.exe. [page]
4, I often have to modify the IP address with the laptop, the graphical interface is particularly painless to modify the IP address, can you use the batch mode automatically modify the IP address it?
A: You possibly can use netsh on the command line to modify the IP address, but also flip it into a batch, so much easier.
D: > netsh
netsh> ip
netsh> interface
netsh interface> ip
this context Command:
set address - set the specified interface IP address or default gateway.
set dns - set the DNS server mode and addresses.
set wins - set the WINS server mode and addresses.
netsh interface ip> set address
Usage: set address [name =]
[[source =] dhcp
[source =] static [ ,],[
title - interface title.
supply - 1 from the following values:
dhcp: The interface is specified, set the IP address using DHCP configuration.
static: set the configuration settings utilizing a local static IP address.
gateway - one for the following values:
: you set the default gateway IP address specified.
none: do not set the default gateway.
gwmetric - default gateway metric. If the gateway is set to 'none', you will need to not set this field.
only within the 'source' to 'static' only set the subsequent selections:
addr - IP address on the specified interface.
mask - Specifies the IP address in the subnet mask.
Example: set address title = step by step into, in truth you possibly can use a command to modify the IP address directly within the DOS, such as:
Netsh interface ip set address local static 10.0.0.9 255.0.0.0 10.0.0.one 1
NOTE: The above parameters can not be omitted, the gateway does not, then please write none, a gateway is usually written a metric.
Think about it, because if you move frequently because for the notebook's IP address modified between the two IP to alter to, just want to create two batches after which execute them when needed to it.
5, ways to cease viruses and other causes on the conflict caused waves last time the program shut down?
A: For Windows XP, Windows 2003 and so comprises shutdown.exe technique, this tool, it is possible to make use of the command shutdown-a shutdown plan to halt the program, for Windows 2000 systems, you could duplicate the shutdown.exe from XP or 2003 file to the 2000 program to use, but if you did not do so in advance, there A good way is to move forward quickly alter the method time to allow sufficient time to solve this problem. Below: change the method time before, and 8 minutes will shut down:
the time change from 2004 to 2003, the 365 days following shutdown:
what? You want to future change? it as you please, not to mention that I taught you.
six,
Microsoft Office 2010, for the convenience of remote management, I have Terminal Services put in on the server, but I fear it will give my server a security risk, in what ways can the port terminal services to the other port 3389 you?
A: Yes, the server needs to modify the registry, the client directly to the specified port number or modify the Terminal Services client connections configuration file.
server:
HKEY_LOCAL_MACHINE System CurrentControlSet Control Terminal Server Wds Repwd Tds Tcp, see the proper PortNumber the right, under the alter you want to decimal The port number to it, such as 7038 and the like, as long as you can not with other conflicts.
HKEY_LOCAL_MACHINE Method CurrentControlSet Control Terminal Server WinStations RDP-Tcp, alter the port number as before.
W2K client:
Open Client Manager Connector, click a connection has become accomplished, click br>
with a record of this or any other text editing software to find open just to export the. cns file, find the number on the line.
WinXP client:
added in the exported default.rdp file server port: i: xxxx or server port: xxxx
Also within the new Terminal Services client also is often directly employed inside the server's IP or identify to add
VII, DC and the client's time is synchronized, why Kerberos authentication is still not complete successfully?
A: 1st to note is the fact that, Kerberos authentication requires two machines to communicate time offset can not exceed five minutes inside a domain environment, the computer automatically through the Simple Network Time Protocol (SNTP) time server completion on the election and synchronization, network connection is stable if the agreement can ensure that the time deviation of two computers inside the effective range inside, but if two computers in numerous time zone set, it seems the same time is probably worse for AD for a few hours, because AD does not work according to local time, taking into Windows networks might possibly be throughout the world, which use a unified the time, so if at the same time zone set up two computers in numerous time zones, although they are synchronized local time, in simple fact the international standard time calculated just isn't the same, and the gap is far more than 5 minutes .
net time it is easy to use this command to watch the current computer's time server, this command is usually executed quickly by the time synchronization.
Microsoft Office 2010 Microsoft Windows system, pr
the utility
Linear Mode
