HCKX400 broken wire type EDM solution

,ed hardy kläder
HCKX400 broken wire type EDM solution


Degree of cutting and programming convenience,ralph lauren skjorter, etc.,ralph lauren danmark, to solve the actual production of medium-sized chamber complex,ed hardy suomessa, large size mold processing. The machine has an automatic telegraph wire tensioning device (pictured),abercrombie paris, the main auto-tensioning device 1. Wire tube 2 Hammer 3 activity row Ji round 4. Be ranked with the slider 5 6 plug wire wheel goose <hole) 7 wire electric summarized Received Date: 2 ∞ 0-06-05 purposes. However, the role of heavy hammer, wire has been in the role by the state of tension, easily broken wires in a non-normal phenomenon. Especially in the commutation of the moment, the phenomenon is more obvious broken wire. As the broken wire. Bring to the operation _ And back to the starting point for processing time-consuming and affect accuracy. Preliminary analysis: wire tension has been in effect by the state, can easily exceed the fatigue limit, and in the commutation, the electrode wire to run a linear change of direction, and then because of the role of the wire hammer generate instant impact load - - pull new wire is easy to l Solution: The original 6 bolt on the machine have interference with the wire. When the bolt is pulled out of the process. Now cut the pin short. Pin and wire no longer contact. After the wire. Through the tight wire wheel or hammer preload wire, it has the right tension, then plug into. The slider fixed to the bed body. This wire is no longer affected by the heavy hammer in the processing of the tension effect. The processing time after Songsi phenomenon, as long as you can and then a tight tight _r. After this simple improvement, the phenomenon of non-normal no broken wires, the new phenomenon of wire less, achieve a multiplier effect. Electrical processing of new technology, new achievements held a national seminar in Shanghai Institute of Education, Training and EDM editing and publishing the Committee on 21-23 August 2000 held in Shanghai Gan processing power of new technology, new achievements seminars. The main task of this meeting is to discuss recent years in the field of electronic processing of new technologies and new results on how the country promoting the application of these new technologies, new achievements, and how to carry out the basic skills and EDM technology education and training. 33 delegates attended the meeting. Meeting by the National Institute of Education, Training and EDM editing and publishing Commission Prof. Qian Qi from. Papers were read at 12. Institute of Shanghai Jiaotong University, which Professor Li Minghui, and Wu Junbo mold made with disabilities. EDM process parameters optimization, process should be worth noting a few problems . The meeting heard the views of most of the delegates decided to Recommended Bi processing and mold design, manufacturing and other aspects of the latest technologies and applications saddle pieces of the meeting that: Electrical Processing Society members education and training with next year with the editing and publishing the work should focus on the EDM field theory; mouth technical training. everyone how to carry out this work made a very good advice. (EDM learn editing and publishing members with education and training sets)

相关的主题文章：


through telephone

Yin Shu-yan

trying to improve the leisure mode of life