Windows 7 Download Microsoft Windows system, pract

one, ways to stop customers press the F8 essential to enter the Superior Boot Alternatives? change the registry to accomplish?

A: Initial, to exhibit that,Windows 7 Download, in prompts the person to press F8 to load the registry just isn't it, so nothing to perform with the registry. Suggestion F8 is the very first Windows startup files loaded Ntldr, somebody modified the file abroad, it is easy to download the subsequent variations 2000 and XP:

then open the DOS window type attrib c: ntldr - s-h-r, and then duplicate ntldrnof8 (or ntldrnof8xp) towards the proper location and title ntldr. Then add attributes attrib c: ntldr + s + h + r.

restart the method, press the F8 crucial findings have already been ignored.

2nd, how to patch offer integrated in to the Windows set up files in Windows? (WinXP SP2 parameter unique)

A: Furthermore to Windows XP SP2 working with the following method from outdoors the patch:

1, use WinRAR (or run compressed bundle add-x option) to unzip the patch package deal to a short-term directory (say d: spx);

two, the Windows set up files ( the whole disc, not just i386 directory) duplicate for your challenging drive to a temporary directory is assumed to be d: windows;

three, run d: spx i386 update the update.exe, use the parameter - s: d: windows;

four, pop-up window displays the progress in the operation has finished d: windows directory the source file has become integrated in the patch deal.

5, it is easy to use WinISO for any class of software that re-create these files into ISO files, along with a bootable CD by copying the boot sector in the techniques to make a bootable CD-ROM (for particulars begin to see the apply WinISO specifics).

update the parameters are as follows:

update [-u] [-f] [-n] [-o] [-z] [-q] [-l] [-s: ]

-u Unattended mode

-f to force other programs to shut at shutdown

-n Do not back up files for uninstallation

-o to overwrite OEM files with out prompting

-z Don't restart following the set up is total

-q Quiet mode (no consumer intervention)

-l record installed patches

-s: the Service Pack files into

for Windows XP SP2, the initial has grow to be the-x parameter / integrate: a, fullpath is the full route on the source files are located.
III, Regedit.exe and Regedt32.exe What exactly is the difference compared to, which 1 must I use?

A: Inside the diverse variations in the working system is rather distinct, the subsequent I had been released:

1, within the Windows NT 3.x, Regedit.exe is the 16-bit Windows operating program up editor. It is used to modify the Windows registration database. This database is located within the Windows directory, the identify is Reg.dat. Database includes specifics about 16-bit programs of details, document management Utilised it to open and print files. Supports Object Linking and Embedding (OLE) apps also use this database. WOW (Windows on Windows) and 16-bit Windows programs use and maintain the Reg.dat. Layer in a virtual DOS machine WOW (VDM) layer. Regedt32.exe could be the configuration editor for Windows NT. It's utilized to modify the Windows NT configuration database, or Windows NT registry. This editor enables you to see or modify the Windows NT registry. It delivers that sections on the registry (referred to as hives) will be the window view. Each window displays two sections: the left is that the registry important folders. The best is associated using the selected registry essential value.

two, in Windows NT 4.0 and in Windows 2000, Windows NT four.0 and Windows 2000 Regedit.exe is incorporated primarily to be able to use its search operate. You are able to use Regedit.exe to alter Windows NT four.0 and Windows 2000 registry, but not Windows NT 4.0 and Windows 2000 all the functions or information types can utilize it to view or edit. Windows NT four.0 and Windows 2000 is included inside the Regedit.exe edition with the following limitations:

• can not set the security for registry keys.

• can not view, edit, or search for the two values REG_EXPAND_SZ and REG_MULTI_SZ information sorts. If you try to view the REG_EXPAND_SZ worth, Regedit.exe displays it like a binary data sort. If you try to edit either of these data sorts, Regedit.exe saves it as REG_SZ, and the data kind no longer performs its intended purpose.

• You are able to not save or restore the registry entries for the hive file.

Microsoft recommends that Windows NT four.0-based computer or Windows 2000 when making use of Regedit.exe only for its search capabilities.

Regedt32.exe is a Windows NT 4.0 and Windows 2000 the configuration editor, used to modify the Windows NT configuration database, or Windows NT registry. This editor enables you to view or modify the Windows NT registry. It offers that sections of the registry (called hives) will be the window watch. Every window displays two sections: the left is the fact that the registry essential folders. The best is connected together with the chosen registry important value. Regedt32 is a powerful tool, utilize it to alter registry values need to be careful. Values within the registry is missing or incorrect set up of Windows will cause the program can not use. Different with Regedit.exe, Regedt32.exe does not support the registry important file (. Reg) import and export.

3, in Windows XP and Windows Server 2003, Regedit.exe may be the Windows XP and Windows Server 2003, Configuration Editor, to modify the Windows NT configuration database, or Windows NT registry. You can use this editor to watch or modify the Windows NT registry. It supports the security settings of registry keys, support for viewing and editing REG_EXPAND_SZ and REG_MULTI_SZ, and to support saving and restoring hive files. The left for the folder that registry crucial. The best is connected with the selected registry important worth. Regedit is a powerful tool. Use it to change registry values will have to be careful. Values inside the registry is missing or incorrect set up of Windows will cause the method can not use. Regedt32.exe is a small plan, only to run Regedit.exe. [page]
four, I often ought to modify the IP address on the laptop, the graphical interface is quite painless to modify the IP address, can you make use of the batch mode automatically modify the IP address it?

A: You could use netsh on the command line to modify the IP address, but also turn it into a batch, so much easier.

D: > netsh

netsh> ip

netsh> interface

netsh interface> ip

this context Command:

set address - set the specified interface IP address or default gateway.

set dns - set the DNS server mode and addresses.

set wins - set the WINS server mode and addresses.

netsh interface ip> set address

Usage: set address [name =]

[[source =] dhcp

[source =] static [ ,],[
identify - interface identify.

supply - one on the following values:

dhcp: The interface is specified, set the IP address utilizing DHCP configuration.

static: set the configuration settings using a local static IP address.

gateway - one of your subsequent values:

: you set the default gateway IP address specified.

none: do not set the default gateway.

gwmetric - default gateway metric. If the gateway is set to 'none', you really should not set this field.

only within the 'source' to 'static' only set the subsequent selections:

addr - IP address for the specified interface.

mask - Specifies the IP address from the subnet mask.

Example: set address name = step by step into, in truth you can actually use a command to modify the IP address directly within the DOS, such as:

Netsh interface ip set address local static 10.0.0.9 255.0.0.0 10.0.0.one 1

NOTE: The above parameters can not be omitted, the gateway does not, then please write none, a gateway is usually written a metric.

Think about it, because if you move frequently because of your notebook's IP address altered between the two IP to change to, just need to create two batches and then execute them when needed to it.
5, the best way to quit viruses and other causes on the conflict caused waves last time the system shut down?

A: For Windows XP, Windows 2003 and so consists of shutdown.exe system, this tool, you are able to make use of the command shutdown-a shutdown plan to halt the method, for Windows 2000 systems, it is possible to duplicate the shutdown.exe from XP or 2003 file towards the 2000 system to make use of, but if you did not do so in advance, there A good way is to move forward immediately alter the system time to allow sufficient time to solve this problem. Below: alter the system time before, and 8 minutes will shut down:

the time change from 2004 to 2003, the 365 days immediately after shutdown:

what? You want to future alter? it as you please, not to mention that I taught you.

six, for the convenience of remote management, I have Terminal Services set up on the server, but I fear it will give my server a security risk, in what techniques can the port terminal services in to the other port 3389 you?

A: Yes, the server needs to modify the registry, the client directly to the specified port number or modify the Terminal Services client connections configuration file.

server:

HKEY_LOCAL_MACHINE System CurrentControlSet Control Terminal Server Wds Repwd Tds Tcp, see the best PortNumber the correct, under the alter you want to decimal The port number to it, such as 7038 and the like, as long as you can actually not with other conflicts.

HKEY_LOCAL_MACHINE Technique CurrentControlSet Control Terminal Server WinStations RDP-Tcp, alter the port number as before.

W2K client:

Open Client Manager Connector, click a connection continues to be completed, click br>
having a record of this or any other text editing software to find open just to export the. cns file, find the number on the line.

WinXP client:

added inside the exported default.rdp file server port: i: xxxx or server port: xxxx

Also inside the new Terminal Services client also can be directly employed within the server's IP or title to add

VII, DC and the client's time is synchronized, why Kerberos authentication is still not complete successfully?

A: 1st to note is that, Kerberos authentication requires two machines to communicate time offset can not exceed 5 minutes in a domain environment, the computer automatically through the Simple Network Time Protocol (SNTP) time server completion for the election and synchronization, network connection is stable if the agreement can ensure that the time deviation of two computers inside the effective range within, but if two computers in various time zone set, it seems the same time is probably worse for AD for a number of hours, because AD does not work according to local time, taking into Windows networks may perhaps be throughout the world, which use a unified the time, so if at the same time zone set up two computers in different time zones, although they are synchronized local time, in simple fact the international standard time calculated isn't the same, and the gap is far more than 5 minutes .

net time you'll be able to use this command to see the current computer's time server, this command is often executed immediately by the time synchronization.