Artful Dodger Jeans WinXP illegal operation

1 Stop error number: 0x0000000A
Caption: IRQL-NOT-LESS-OR-EQUAL
the usual reasons: the driver uses an incorrect memory address.
Solution: If you can not login, then restart the computer. When the list of available operating system, press the F8 key.
screen in the Windows Advanced Options menu, select
check for properly installed all the new hardware or software. If this is a new installation, contact the hardware or software manufacturer may be required to obtain any Windows updates or driver.
run by computer manufacturers to provide all the system diagnostics software, especially the memory check.
Disable or Remove newly installed hardware (RAM,womens asics shoes, adapters, hard drives, modems, etc.), drivers or software.
to ensure that the hardware device drivers and system BIOS are the latest version.
ensure that the manufacturer can help whether you have the latest version, can also help you get the hardware.
Disable BIOS memory options such as cache or a shadow.
2, Stop error code: 0x0000001E
Caption: KMODE-EXCEPTION-NOT-HANDLED
the usual reasons: kernel-mode process attempts to perform an illegal or unknown processor instruction.
Solution: Make sure there is enough space, especially in the time to perform a new installation.
if a Stop error message that a particular driver, then disable him. If you can not start the computer. Should try to use safe mode to remove or disable the driver.
non-Microsoft supported if the video driver, try switching to the standard VGA driver or to provide the appropriate Windows driver.
disable all newly installed drivers.
ensure that the latest version of the system BIOS. Hardware manufacturers can help determine whether you have the latest version,timberland roll top, you can also help you get it.
BIOS memory options such as cache, shadow.
3, Stop error number: 0x00000023 or 0x00000024
Caption: FAT-FILE-SYSTEM or NTFS-FILE-SYSTEM
common cause: issues in Ntfs.sys ( allows the system to read and write NTFS driver driver files) in.
Solution: run by a computer system manufacturers to provide diagnostic software, particularly hardware diagnostic software.
disable or uninstall all anti-virus software, disk defragmenter, or backup program.
run at the command prompt Chkdsk / f command to check the hard drive is damaged,mens onitsuka tiger, and then restart the computer.
4, stop number: 0x0000002E
Caption: DATA-BUS-ERROR
the usual reasons: the system memory parity error, usually caused by hardware problems.
Solution: Remove any newly installed hardware (RAM. adapters. hard. modem, etc.).
run by computer system manufacturers to provide diagnostic software, particularly hardware diagnostic software.
to ensure that the hardware device drivers and system BIOS are the latest version.
hardware suppliers to provide system diagnostics, run the memory check to find fault or does not match the memory.
Disable BIOS memory options such as cache or a shadow.
used the system after the start list, press F8. In the Windows Advanced Options Menu screen, select Then press Enter. If this does not solve the problem, you may need to switch to a different video adapter list, a list of supported video adapter, see the hardware compatibility list.
5, stop number: 0x0000003F
Caption: NO-MOR-SYSTEM-PTES
the usual reasons: the right of each clean-up drive yo program.
Solution: Disable or uninstall all anti-virus software, disk fragmentation process or backup procedures.
6, Stop error number: 0x00000058
Caption: FTDISK-INTERN-ERROR
the usual reasons: a fault-tolerant in the main set of drive failure.
Solution: Use the Windows installation disk to start the computer, from the mirror (2) system drive. About how to edit the Boot.ini file to point to the guidance system drive mirror, support services in the MIcrosoft Web site search
7, Stop error number: 0x0000007B1
Caption: INACCESSIBLE-BOOT-DEVICE
common cause: initialize I / O system (usually refers to the boot device or file system) failed.
Solution: boot sector viruses usually cause this Stop error. Is the latest version of antivirus software, check your computer for viruses. If you find a virus,timberland shoes uk, you must implement the necessary not to look for him to get rid of the supernatant from the computer, see the antivirus software documentation for how to perform these steps.
remove all newly installed hardware (RAM, adapters, modems, etc.).
check the Microsoft Hardware Compatibility List to ensure that all hardware and drivers are compatible with Windows.
If you are using proper SCSI adapter, available from hardware vendors in addition to the latest WINDOWS drivers, SCSI device to disable sync negotiation, check whether the end of the SCSI chain and matching equipment SCSI ID,Asics mexico 66, if not sure how to do to these steps, refer to the hardware device's documentation.
If you are using IDE devices, the board's IDE port is defined as the only major port. Check the IDE device master / slave / unique setting. Remove the hard drive in addition to all IDE devices outside. If you can not identify how the implementation of these do not look for, refer to your hardware documentation.
If the computer is using NTFS file system format, you can restart the computer,Artful Dodger Jeans, and then run on the system partition Chkdsk. / f / r command. If the error can not start the system, then use the Command Console and run Chkdsk / r command.
run Chkdsk / f command to determine whether the file system damage. If Windows can not run Chkdsk command, the drive to another computer running Windows,Asics running shoes, and then from the drive on a computer running Chkdsk command.
8, Stop error number: 0x0000007F
Caption: UNEXPECTED-KERNEL-MODE-TRAP
usual reasons: it is usually due to hardware or software problem caused, but generally caused by hardware failure.
Solution: check the Microsoft Hardware Compatibility List to ensure that all hardware and drivers are compatible with Windows. If the computer is not compatible motherboards will have this problem. Remove
run by newly installed hardware.
run by computer manufacturers to provide diagnostic software for all systems, especially the memory check.
Disable BIOS memory options such as cache or a shadow.
9, Stop error number: 0x000000507k7Z
Caption: PAGE-FAULT-IN-NONPAGED-AREA
the usual reasons: memory error (data not use paging file-swapping to disk.)
Solution: Remove all of the newly installed hardware.
run by computer manufacturers to provide all the system diagnostics software. Especially the memory check.
check for proper installation of all new hardware or software, if this is a new installation,Cheap Air Max 95 Husband and wife on the 6th floor, contact the hardware or software manufacturer may be required to obtain any Windows updates or driver.
disable or uninstall all anti-virus program.
Disable BIOS memory options such as cache or a shadow.
10, Stop error number: 0x00000077
Caption: KERNEL-STEL-STACK-INPAGE-ERROR
The usual reason: Unable to kernel data from the paging file will read the required page into memory.
Solution: Use the latest version of anti-virus software,Asics onitsuka tiger, check your computer for viruses. If you find a virus, perform the necessary steps to remove him from the computer supernatant. See the manufacturer to provide all the system diagnostics software, especially the memory check.
Disable BIOS memory options such as cache, shadow.
11, Stop error number: 0x00000079
Caption: MISMATCHED-HAL
the usual reasons: hardware abstraction layer and the kernel or machine type mismatch (usually occurs in single-processor and multi-processor configuration files are mixed in the case of the same system.)
Solution: To resolve this error, use the command console to replace the system files on a computer error.
single processor kernel file system is Ntoskml.exe, and multi-processor system kernel files are Ntkrnlmp.exe, however, these documents with the installation media file corresponds; After installing Windows2000 and, regardless of which use the original files will be renamed to Ntoskrnl.exe file. HAL file also uses the name of the Hal.dll after installation but the installation media, installation media, but there are a number of possible HAL files.
12, Stop error number: 0x0000007A
Caption: KERNEL-DATA-INPAGE-ERROR
The usual reason: Unable to kernel data from the paging file will read the required page into memory. (Usually due to failure on the paging file, virus, disk controller error, or caused by the fault of the RAM).
Solution: Use the latest version of antivirus software to check whether there is a computer virus. If you find a virus. Perform the necessary steps to remove him from the supernatant computer, see the software documentation to know how to fall ill degree of implementation of these steps.
If the computer is using NTFS file system format. Can restart the computer, and then run on the system partition Chkdsk / Z
/ f / r command. If the error can not start the command, then use the Command Console and run Chkdsk / r command.
run by computer manufacturers to provide all the systems in a client software, especially the memory check.
13, Stop error number: 0xC000021A
Caption: STATUS-SYSTEM-PROCESS-TERMINATED
The usual reasons: user-mode subsystem, such as Winlogon or the Client Server Runtime Subsystem (CSRSS) has been damaged, it can no longer guarantee security.
Solution: Remove any newly installed hardware.
If you can not login, then restart the computer. When the list of available operating system, press F8. Windows2000 Advanced Options menu in the screen, select: Then the car will.
run the Recovery units, and allow the system to repair any detected errors.
14, Stop error number: 0xC0000221
Caption: STATUS-IMAGE-CHECKISU7M-MISMATCH
The usual reasons: the driver or system DLL has been corrupted.
Solution: run the fault recovery console, and allow the system to repair any detected errors.
If the RAM to the computer immediately after the error occurs, then the paging file might be damaged, or by the failure or the new RAM is not compatible. Pagefile.sys and return the system to remove the original RAM configuration.
run by computer manufacturers to provide all the system diagnostics software, especially the memory check