| Back to logs list
137126 2008 年 04 月 11 日 13:16 Reading (loading. ..) Comments (0) Category: computer data
5 Fifth Step: Make a cue for wav file format to wav format ... ... specially crafted cue file, head to the end to add CD burning out and identify the number of tracks tracks! In the fourth step, based on the Very simple! Only need to change the three characters!
the fourth step
PERFORMER Fashao Die ten com]. ape in the document is If .-. [Fa Shaodie 10CDImage]. [VeryCD.com]. ape Just change the three characters! Simple ah! Save and exit, this time with foobar2000 open the cue file for wav format, should be able to play, if not, then that may be your file name and file extension such as. Wav file name is not strictly identical with the source! This is an example above, only three characters to be changed into Simple really good ah!
Special Note:
1, regardless of the source file is ... ... ape files or wav files, or the directory listing cue ... ... Other software will be able to find them and correct play, cue means No list of this directory, cd to burn multiple tracks can not tell! In fact, with feurio burning software to burn the final CD, is that the real use to wav wav source file and source file that is specially crafted cue file ... ... is that is: feurio automatically in accordance with the
2, note that above said red Hugo Fashao Die Ten is a standard cue file, is omnipotent (cue need to use any other file formats can use this as a standard reference and editing)! Can use Notepad to save the file format into a cue! Again, you want to save into a cue format rather than txt format! The following are examples of using pictures to explain, can be used as reference, use Notepad to open the cue file downloaded from the Internet, and then follow the following method to modify the file name of the legend on it (Note: only need to pay attention to the blue part of the circle!); Another key document is the cue and ape files to wav files or in the same directory, foobar will be able to correctly identify the cue so that the inside of the original ape or wav files to play selections:
6, Step Six: downloaded and installed from the CD burning software, here is recommended feurio, suitable for high-fidelity CD burning.
Download:
If English is not very good, can go to the forum to register and then download cdbest localization language pack:
Download:
which has an attachment you can download, download good after using winrar software to extract the folder inside the Language.Chinese to c: program files feurio directory. Then open the feurio software program menu in the first program ... ... slect language in which select
(Special Note: It is a lot of friends show: feurio software downloaded from the Internet is best not to register, does not affect the function and normal use, if you look up on the surface of success, but there will be burning a good CD added some unwanted interference signals, such as Address:
Links: Professional Feurio burning burning software tutorial
look at Introduction:
has captured the software Feurio CD tracks,
Leshan words of TEM volume (20 points count you vicious) - Qzone log, play CD and Wave files, edit Wave files, and burn music CDs and other functions. According to the company claims has the following features:
1. Supports up to 8 Teac burner, a 6-speed for CD replication or master manufacturing.
2. with Jitter correction with hardware CD-ROM, you can grab music CD full of digital data on the alleged speed of up to 15 speed.
3. program itself has an excellent multi-tasking capabilities, you can listen to tracks when burning. In the NT, use, as long as the settings are correct, almost impossible to
4. complete project capabilities, CD-ROM contents can be preserved intact for use.
5. with ultra-burning capabilities, can detect the actual capacity of the CD, the ultra-burning.
6. recordable Mix-Mode CD.
7. Professional Edition can also use multiple different brands burner, copy, or burn the master work of
8. to MP3 music files directly to audio CD burning AudioCD, Professional Edition containing BladeEncoder compression module.
9. Support CD-Text burning.
10. with CD covers, labels, editor.
11. Adjustable Gap between the size of each track (pause seconds).
12. Support CDPLAYER.INI information exchange
13. support br> 16. Copy data CD
17. read the full ATIP information
18. a more complete burn CD-Text capabilities
look it claims the ability to solve the problem right Jitter ! In reading, the current drive has to do jittercorrection some functions, some to the output buffer after operation, some in the DAC is doing, some control the read head to the precise location. We recall the year of the Red Book AudioCD specifications, can understand that the problem is in PCM data stored on the disc, and no sector mark, so many CD-ROM drive in the read process, because the hard drive or burner if buffer full, interruption of the original a reading position, again to read, they will grasp the correct location of the original. The result of this interruption to form a waveform distortion, commonly known as jitter. Audio CD of this year to develop specifications to allow this to read the error, 75frames per second, the leak can lose a few frame allowed. If you are in the home stereo to listen to, and perhaps do not hear the difference?
but use the computer ripping, why this issue has become very important but it? Aside D / A and the flat amp and other issues aside (in fact, many parts are temporarily put it to to sound more accurate than the average level of household; perhaps not as professional name dial, or fever, but at least have got the spectrum analysis can be used on the This can only be caught if you can Look at the computer, ripping the question! If the crawl speed is 8 speed data, then 8 * 150 = 1200 (k),
I miss you - Qzone log, which is hard for the average amount of data is nothing, but vexing part is that the system itself takes up CPU and I / O timing of the overhead, read out the information on the cause is unable to continue to write hard disk (of course, not continuous direct burning). Since the data is unable to continue to write too many hard drives, CD-ROM drive to read the action they have to wait for disk write to complete, and then continue to read the data; this read interrupt is usually the formation of CD-ROM drive to read audio tracks jitter situation. Solution for that? Have to do to find a reading head position calibration of the optical drive it!
Another problem is: jitter solution to become it? Yes, at least on the copy is doing that. Users to play audio in the general discussion of the jitter, and jitter are talking about here is some A sine wave in the reading, probably because of variable speed dial, or read the first drift produced a degree of jitter, that both can not be completely eliminated, only hope to minimize it can not hear the difference. Next is D / A converter waveform distortion, combined with analog amplification part of the timing delay or disorder (guided by the slew rate in Tr or other active and passive parts of the charge and discharge, shock and other issues), then the wire and power pollution. ... Alas! Anyway, that is to say that fans of the old and sick of the endless sigh, shaking his head! Perhaps this is a small problem, but higher in the CD dynamic range, the simple little flaw will be magnified by the playback system can
we are now only between tolerance and the purse to find a balance. After all, the source discussed here is part of the question, so in this part of the solution can be annoying since the jitter, or at least do not hear the difference with the original film the extent of it. Incidentally, the question is: different dye film, burn music CDs, will lead to different voice? The problem is that it looks a bit funny paradox, there is no problem! There are only different dyes and materials, resulting in reading is not smooth, the formation of the phenomenon of noise; and not because it is a blue chip or a platinum film, there is more than What a sweet voice and so on. The same digital data recording in a different film, and is has a fixed position to deal with the error correction method, can understand what the author said. But based on experience, poor film indeed All right! This is also easy to solve, look at the original film are 2,3 million off the sake, the use of imported gold pieces back burner now! Are you still too expensive?
Feurio This procedure can really solve the jitter problem? If you have a CD-ROM drive with jitter correction to match, I can say with certainty is almost no problem (CD-ROM drive to fight, but some high-level turntable, so can only be If not? It can also help you reduce this problem. You can Feurio the Program parameter where the Test Device, CD-ROM drive and patience to see the capability, it would be the proposed 'offset' value, fill in the 'jittercorrection' behind the 'offset' field. So later when you copy music CDs, the sound can greatly reduce the chance of violence. If the master scratch too, please re-test value to the film subject was not to have to use the same value per unit.
Note the following before using these points:
1. Program execution at the beginning, asks program data path, this means dealing with wave files, hard disk location occupied.
2. based on experience, if you do not do audio or effect of treatment, about as big as 1GB of space on it. If there are other needs, consider looking for cheap high-capacity hard drive teeth to match, do not necessarily have to find SCSI hard disk capacity as it ripping pretty good.
3.Feurio mainly includes Manager, Write, Track Edit and Label the four modules. In addition to Track Edit be with the Manager use, who can be independent of the other triple execution.
4. Projects directory will contain all your project data used, and the actual wave file data is stored in section 1. point in the data path specified (usually the hard drive wave ri .)
5. Program dialog box has been replaced mostly in English, German, small part, if garbage does not prevent the program running.
6. In the Here the If you cut anything,
Beauty shot a few days ago - Qzone log, out of the data file will be caught a little bit, could hear what difference? Probably does not come out, because few people care about the time gap between each track. If you want to copy the disc live recording, do not bother, you can direct to Write replica. I thought only about the early use of Sony 2-speed CD-R piracy of film, because they do not support the DAO, so that some live recording of the film, the gap between the rails nasty, with Feurio tried it was satisfactory .
7. cover the text editor is in accordance with your settings in the project automatically generated to make the cover quite professional standards; unfortunately not free to change the text.
8. TrackEdit in the wealth of options, only allows you to track and deal with some sub-editor's work-related information.
to use Feurio copy music CDs, please refer to the following description of two documents:
1 . using Feurio Write
2. using Feurio Manager
8, the eighth step: the official recorder (recording speed reasonable choice, in most cases Under the proposed 2X or 4X recording speed selection is better) on the seventh step of the way into wav format and the above source file format to do the appropriate cue wav format file, note that you must import the cue list of files in this directory to correctly distinguish between multi- Track! Well, after burning will automatically pop up, about 15 minutes. In fact, the choice of recording speed is according to CD-R disc to decide, for each CD-R disc, has the best burn speed, as, like everyone has their own characteristics, the most Best burning speed can not be generalized. 2X or 4X generally can.
Special Note: After the choice of a good burn, we must patiently wait about 15 minutes or so, be sure to burn a good CD, such as automatic pop up! Otherwise, stop halfway or hand
moving out can cause damage to the disc, when burning is also recommended best not to other operations, the maximum guarantee a perfect recording.
7 Step Seven Supplementary information: Identification recorder! Some people may experience feurio not recognize burner, according to the following method should be able to solve the problem. first step in identifying open burner
Feurio!
If the method in accordance with strict implementation of the above, you are a high-fidelity CD recording experts! To burn a good CD, the following few points to note.
good CD audio (high-quality formats such as ape or wav files or high quality genuine CD) + high quality recording software feurio + burner + high-quality high-quality CD-R music disc + proper specific burn speed (typically as 2X or 4X) + the correct recording methods. = High-quality discs
CD album carved out of this CD album, their fidelity, and the original almost exactly the same in the 15,000 yuan, or speaker system uses a headset system ... ... is almost blind and hearing people are difficult to distinguish genuine or burning version! View topic has Erfu slightly ................ Oh .........
1, high-quality audio (such as high-quality ape, wav, flac and other formats; high quality genuine CD, etc.);
2, high-quality burning software (such as feurio);
3, high-quality recordable drive (such as imported high quality DVD recorder, CD recorder, or early and so on can.);
4, dedicated high-quality music discs CD-R (such as Mitsubishi's exclusive CD-R);
5, the correct recording methods (such as the burn speed to 2X or select the most recommended 4X, etc. methods)