Office 2007 Standard Data Logger Products for Stan

Copyright © DATAQ Instruments, Inc. All rights reserved. This page last updated April 15, 2011.
•• Product Quick Links Data Acquisition Data Logger Chart Recorder Temperature Data Loggers Humidity Data Loggers Temperature and Humidity Data Loggers 4-20 mA Current Loop Data Loggers Voltage Data Loggers USB Data Loggers USB Data Acquisition Ethernet Data Acquisition USB DAQ
Find the right product for you
with our Product Screener
Data Logger Products for Stand-alone and PC-connected Applications
Note that the term "data logger" implies a product that can acquire data to its own memory and does not need to be connected to a PC. If your application is PC-connected then please visit our USB Data Acquisition or Ethernet Data Acquisition Pages.
Data Logger Selection Guides
Data Logger Selection Guides View our entire line of data logger products in one glance EasyLog Series Very Low Cost Data Loggers (compare)
EL-USB Series Data Loggers Starting at an incredible $63, EasyLog Series products deliver data logging simplicity and performance for less. Low-cost Temperature and Humidity Data Logger with Graphical Display (learn more)
DataView DVTH Temperature and Humidity Data Logger The DataView Temperature and Humidity (DVTH) Data Logger measures temperature (15°F to 150°F), humidity (0 to 99% RH), and dew point. The DVTH features a built-in real time text and graphical display and stand-alone operation using standard "AA" batteries. DI-71X Series Data Loggers without Displays (compare) (learn more)
DI-710 Series Data Loggers

DI-710 Series data loggers are our most economical multi-channel data logger, designed to measure pre-amplified inputs that don't require isolation or signal conditioning.
DI-718B Series Data Loggers
Model DI-718B and DI-718Bx Series data loggers allow you to mix and match isolated industrial amplifiers that install right in the chassis. Measure voltage, current, 4-20 mA process current, temperature, pressure, load, torque flow and any other industrial signal in any combination. The paperback novel-sized DI-718B supports up to 8 channels, and the slightly larger DI-718Bx supports up to 16. GL Series Data Loggers with Displays (compare)
GL220 Data Logger The GL220 features a 4.3 inch built-in color LCD display for setup and real time display and offers 10 isolated analog channels for voltage, current, 4-20 mA process current, and thermocouple-based temperature measurements. The GL220 also includes discrete measurements for logic level,Office 2007 Standard, pulse counting, and rate. The GL220 is a replacement for the GL200A (view the comparison).
GL820 Data Logger The GL820 features a 5.7 inch built-in color LCD display for setup and real time display and offers 20 isolated analog channels (expandable to 200) with the same measurement functions as the GL220, plus RTD temperature measurements. The GL820 also includes discrete measurements for logic level,Windows 7 Starter, pulse counting, and rate. The GL820 is a direct replacement for the GL800 Data Logger.
GL900 Data Logger The GL900 features a 5.7 inch built-in color LCD display for setup and real time display and offers 8 fixed isolated analog channels with a full scale measurement range of 20mV to 500V at sampling speeds as high as 100,000 Hz to internal memory. The GL900 also includes discrete measurements for logic level, pulse counting, and rate.
MT100 The MT100 features a 5.7 inch built-in color LCD display for setup and real time display and offers 10 isolated analog channels for voltage, current, 0/4-20 mA process current, and thermocouple-based or RTD-based temperature measurements. The MT100 also includes discrete measurements for logic level, pulse counting, and rate. Data Loggers for AC Line Measurements
CL601 Data Logger
The CL601 is designed for TRMS current measurements. It features an integrated current probe that supports a current measurement range of up to 600A with 0.1A resolution. The instrument features a built in 240,000-sample memory, integrated LED indicators to display status, and a built-in USB interface for uploading configurations and downloading recorded data. The CL601 is powered from two standard AA cells providing complete portability, and a "use anywhere" design.
L261 Data Logger The L261 data logger is designed for stand-alone high voltage DC and TRMS AC measurements. It features a pair of safety banana sockets that accepts a direct connected voltage of up to 600 V with 0.1-volt resolution. The instrument features a built in 240,000-sample memory, integrated LED indicators to display status,Buy Windows 7 Starter, and a built-in USB interface for uploading configurations and downloading recorded data. The L261 is powered from two standard AA cells providing complete portability, and a "use anywhere" design. Common DI-71x Data Logger Features PC-connected Data Loggers via Ethernet or USB
All DATAQ Instruments data logger products offer PC connectivity using either a USB or Ethernet interface. Choose USB if the PC will be located near the data logger. Choose Ethernet to communicate with the PC over long distances, on a local area network (LAN), and even over the Internet.
Real Time Data Logger Performance
While tethered to a PC, WinDaq software (provided with the instrument) allows an instantaneous and continuous view of all signal activity in real time.
Data Logger Stand-alone Option
The stand-alone option allows you cut the cord connecting the PC to the instrument. All data logger instruments can record to a 16MB to 2GB SD-type memory card; the same kind used in digital cameras and MP3 players. Select either a circular or record-until-full memory configuration.
Extended Sample Rates Beyond the Traditional Data Logger
All DATAQ Instruments data loggers offer sample rates that range from 18 samples per hour to 10,000 samples per second (assumes SD latencies of 80 milliseconds or less). No more guessing about measured values in under-sampled signals.
Data Logger Models To Fit Every Application and Budget
Whether you have high-level, pre-amplified signals to measure, or you need amplifiers integrated with the product, DATAQ Instruments has a data logger solution for you. We can measure torque, pressure, process current, distance, rpm, load, temperature, voltage, current, and much more. Directly connect thermocouples, RTDs, strain gage-based transducers of all types, string pots, LVDTs, or any 4-20mA sensor. All amplifiers are fully isolated.
Embedded Real Time Clock
Each data logger in our product line contains a crystal-controlled time-of-day clock. Every data point acquired is time and date stamped allowing each to be identified with an exact date and time of capture. Correlating an event in your monitored process with acquired data has never been easier.
Circular or Record-until-full Memory Selections
Do you want to record until your memory card is full, and then stop? Or perhaps you'd prefer to have the data logger record continuously, seamlessly wrapping to the beginning of the memory card when the end is reached? Our data logger products give you unprecedented flexibility in how you manage stand-alone memory.
Automatic Recovery from a Power Failure
Do you need long term, unattended measurements? Are you concerned that a power outage may require a costly and inconvenient personal visit just to manually restart the data logger? Forget it. Our data loggers provide an automatic restart feature that seamlessly resumes recording when power is restored.
Synchronize to External Events
All our data loggers provide an auxiliary input that may be connected to an external switch,Office 2007 Professional Key, and may be configured to stop or start recording based upon its open or closed state. Record continuously, or synchronized with your process. It's up to you.
Flexible Power Requirements
Power our data loggers using the provided AC adaptor, or directly from any 9-36 VDC source. Whether you use them in the lab or in a vehicle, our data loggers easily adjust to your changing requirements.
Calibrate into Any Unit of Measure
For many applications, recorded values calibrated in "volts" are not very useful. Our data loggers convert to real engineering units, like PSI,Office Standard 2007 Key, Amps, LBS, °F, °C, or any other linear unit of measure. No more calculations by hand. No more guess work.
The Need for Speed
The term "data logger" traditionally means a product with plodding sample rates, great for temperature and humidity measurements but little else. No more. Our data loggers sample as slow as 18 samples per hour, and as fast as 10,000 per second. Data logger products with the power to connect to fast- and slow-changing signals means more flexibility and a better return on your instrumentation investment.
Deploy One, or Multiple Units
We don't limit you to only one connected data logger. Connect as many as you like and manage them independently with our provided Hardware Manager software. Deploy them per machine, per area, or any combination that makes sense for your application.
WinDaq Software Support
Each data logger is provided with WinDaq software, the best real time trending, storage, playback, and analysis software on the market. WinDaq/Lite is provided without extra charge and allows display and disk-streaming rates of 1,108 samples per second or lower. Or you can purchase WinDaq/HS, a high speed version that allows display and disk-streaming up to 4,800 samples per second.
Rugged Construction
DATAQ Instruments data logger products feature all-metal construction consisting of a thick aluminum base plate, and a steel wrap-around. Aluminum front and back panels (except the see-thru front cover of the DI-715B) cap the ends of the products.