if DHCP is enabled

Version 4.0 is now available, see what's new for a lot more information.

WirelessMon is actually a computer software tool that permits users to monitor the standing of wireless WiFi adapter(s) and assemble information regarding nearby wireless entry factors and warm spots in real time. WirelessMon can log the knowledge it collects into a file, even though also delivering thorough graphing of signal degree and actual time IP and 802.11 WiFi statistics.
Confirm 802.11 network configuration is proper. Examination WiFi hardware and gadget drivers are operating effectively. Verify signal ranges from the local WiFi network and nearby networks. Aid find resources of interference for your network. WirelessMon supports the MetaGeek Wi-Spy (2.4i, 2.4x and DBx) valuable for locating interference from non 802.11A/B/G/N units transmitting on the exact same frequencies Scan for scorching spots in your neighborhood region (wardriving) Create signal strength maps of a location (also referred to as warmth maps) GPS help for logging and mapping signal strength Mapping could be performed with or without a GPS unit Effectively find your wireless antenna (specifically crucial for directional antennas). Validate the protection settings for regional accessibility factors. Measure network speed & throughput and view accessible data rates. Aid check Wifi network coverage and range A feature-rich,Cheap Office Professional Plus 2007, value-for-money alternative to NetStumbler.

(Click images to view screenshots)

Compatibility
Any wireless adapter complies with the NDIS_802.eleven should be able to report info to WirelessMon. Note that only Windows XP, 2003, Vista & Win7 assist this computer software. Windows 95, 98 and NT are not supported. Windows 2000 (Service pack 4 and above) may work but is not actively supported.

All the various IEEE 802.eleven standards are supported, including 802.11a, 802.11b and 802.11g. 802.11N is supported to the extent provided by Windows,Buy Windows 7 Enterprise, as the draft becomes a completed standard far more 802.11N assistance should become obtainable. Some features may not be supported by some wireless adapters,Cheap Office Professional 2007, typically they will report only partial details in this case. It has been also been noted that several wireless adapter manufacturers are not supplying device drivers that are fully Windows compliant.

From edition 4 Garmin USB GPS devices are supported via USB connection.
Wireless LAN information
The following wireless LAN data is displayed by WirelessMon (when accessible, as not all wireless adapters will support all of these features).
Current connection info: SSID; Connected entry point MAC address; Signal power; Tx Power; Authentication type; RTS Threshold; Fragmentation Threshold; Channel in use; Frequency being used; Number of Antennas; Beacon Period; ATIM Window; Dwell Time; Hop Pattern; Hop Set. Stats info: More than 30 parameters are reported. Including a detailed break down of frames sent and received,Microsoft Office 2010 Standard Key, error counts, transmission retry counters and related low stage data. IP information: Information about the current TCP/IP connection is reported. Including the adapter MAC address; Adapter device driver name; the IP Address; Subnet Mask; if DHCP is enabled; the Gateway Address and the DHCP server IP address. IP counter information: Network throughput is monitored and displayed. This includes the maximum bandwidth accessible from the network adapter hardware, the current send and receive data rates in bytes per second and packets per second, plus error counters. Standard and Professional Edition Differences
There are two registered version accessible, standard and professional. The professional edition has all of WirelessMon's features enabled whilst the standard version has the following restrictions;
No GPS: GPS coordinates are not supported and cannot be used for logging or creating a signal power map No signal strength map: The map tab and options are disabled so a signal strength map can not be created,microsoft windows 7, saved or printed. Free Upgrade
We are offering a free upgrade to WirelessMon 4.0 to our existing end users who purchased previous versions from us. If you have and older edition of WirelessMon you will require a new registration key. Please see the Free Upgrades Page for details of upgrades.
Articles
Creating a signal strength map with WirelessMon

802.11 Wireless networks overview

802.eleven Wireless bandwidth tests

WirelessMon FAQ