cheap vibram fivefingers 20 species of PS Technolo

have to remember that 20 species of PS technology! The United States will not do your photos!

have to remember that 20 species of PS technology! The United States will not do your photos!
a simple digital photo retouching
1 open late pictures, like the implementation of color / saturation (-40) to reduce saturation.
2 new layer, the layer mode to soft light, with the brush tool will need to polish the part of the painting several times, where you can easily extract the color palette used
3 pictures soft color transition is not enough, then about the implementation of the following Gaussian blur filter (+85)

simple with photos came to light less than
1 Open the image, copy the background layer, change the background color filter layer pattern of the background
2 Levels adjustment layer

30 秒 get Plmm artistic photos
1 Open the picture, copy the background layer twice
2 for reproducing the background layer a Gaussian Blur (radius of 4 to 6), Copy the background layer to the second mode of light
3 new layer, add filling pattern (a semi pre-defined gray well and half white horizontal stripe pattern), set the blending mode to Multiply

image displacement effect
1 Open the picture, a new layer, select the View - the ruler, select the move tool, respectively, from the top and bottom drag out the two blue markings (9 cell)
2 Using the rectangle selection tool, fill the box (dark gray 1,9, 5,7 black, 3 light gray) to psd format, and then close the file
3 to Filter - distort - the replacement, select the save psd File
Notes (black (color value = 255) is the largest positive displacement, that is the corresponding image pixel to the right and down; gray (color value = 128) did not produce displacement)

photo shading effect
1 Open the image, Select - Select All, then Edit - Copy, build a new channel, Edit - Paste to paste the copied images into the new channel]
2 implementation of the image - adjustment - Anti-like, back to RGB channel, edit - remove, delete the original image
3 to Select - Load Selection, call the new channel, Executive Editor - fill (the color)

atomization
1 Open the picture , a new layer, set foreground / background color (black / white), to Filter - Render - Clouds, will add a layer mask layer
2 Repeat the filter - render - clouds, image - Adjustment - Brightness / Contrast (80,0, a mode to color filter layer)

character illustrator effects
1 Open the image, copy the background layer, the implementation of the image - adjustment - Channel Mixer (Gray , +30, +60, +10, monochrome), the implementation of the filter - stylize - find edges, remove the noise
2 Levels of mixed mode to %
3 background layer add a Levels adjustment layer, adjust the output levels (0, +155) the implementation of form, color image Marxist
4 - adjustment - optional color, fine-tuning of color (red, 0, +100, +100, -75; yellow, 0, -40, +100, -40)

old photos using the color overlay to add light and color effects
1 Open the image, copy the background layer Executive Image - adjust - to color, adjust brightness / contrast (-42, +18)
2 Add need to color (red), and then merge visible layers
3 add filters - lens flare (brightness +100)
4 Duplicate the background layer, added again, 3 mixed-mode to Mask
6 Select + J).
2. on the replication layer uses Gaussian blur filter (+4.0).
3. do color adjustments (+50,0, -64)
4. with a blurred edge eraser to the need to clear some scratch.
5. the proper use layer blending modes.

create hazy in bright (landscape, ecological type)
1 Open the image, copy the layer.
2 copies of the layer blending mode to 12,0).
5 add some sharpening, reducing transparency.

a photo to add a glass effect
1 selected area,vibram bikila online Boehm, press Ctrl + J
2 on the shear layer the Gaussian blur (+3.1 pixels).
3 to adjust color balance (-39, +29, +16).
4 new layer. Choose the thickness of the glass area add a custom gradient filling (black and white gray, the order is dark, glossy, dark, high light), press Ctrl + T on the constituency to adjust the thickness of the glass.
5 filter - distort - Glass , select your favorite pattern (distortion, smoothness of 1, zoom 50%).

burning paper effect of the old photos - PS handling $
1 pure open a picture, the implementation of the image - adjustments - Hue / Saturation (+1, -58, +1).
2 image - adjustment - change (mid-tones, deeper yellow, deeper red highlights).
3 Duplicate the background layer, the implementation of filter Mirror - texture - particles (9,56, vertical).
4 new layer, to Filter - Render - Clouds.
5 and run the image - adjust - brightness / contrast (+27, +100 ).
6 with the Magic Wand, select one layer of black constituency.
7 off layer of a preview, click Copy the background layer, the foreground color to dark brown.
8 Select - Modify - Expand (5 pixels), select - Feather (5 pixels)
9 Edit - Fill (foreground), the selected layer one, with the magic wand select the black constituency
10 off the background layer and A preview of the layer, copy the background layer selected, Executive Editor - Clear.
11 images - the canvas size, height / width of one centimeter was increased, positioning (in).
12 opened the background layer Preview , select the background layer and fill the foreground color (light brown).
13 Duplicate the background layer selected, do Layer - Layer Style - projection. (positive end laminations, 45% opacity, angle 45, from 7 expand 2%, size 10).
14 merge all layers.

mottled effect of the other arts frame a new system of law
1 file by D key fill the background is white
2 Then, filters --- --- clouds rendering.
3 CTRL + M to adjust under the curve (high contrast black and white).
4 After completion of the effect of further next filter - distort - Glass (Distortion 7, 3, smoothness, texture - canvas, zoom 50%).
6 Create a new layer, the background is black, the other a new layer, add sufficient white rectangle.
7 layers in the implementation of the rectangle where the filter - distort - replacement, select the default option. Then find the newly saved PSD file can be replaced.

PS rendering the atmosphere of your photos (landscape)
1 Image - Adjust - Levels (RGB +29,1.0, +234). Form the implementation of Marxism
2 Color Hue / Saturation command (full size -14, +41, -1).
3 continue to Hue / Saturation (red, hue values ​​decrease, increase saturation).
4 continue the hue / saturation (yellow, -22, +45, -1)
5 continue to Hue / Saturation (green, +15,0,0).
6 adjust the brightness / contrast (brightness reduce / increase contrast). Xingse doctrine (
simple sketch effect
1 easy to open picture, do to the color, adjust brightness / contrast (brightness decrease / increase contrast).
2 Duplicate the background layer (Ctrl + J), select the background layer, the implementation of the filter - the style - find the edge, then the UXXXXX sharpening, then
layer mode to Overlay.
3 new layer, fill White, Add Noise, then the motion blur, the layer mode to Multiply.
4 rubber tools (opacity to 15%), wipe some of the high light.

stroke sketch effect of drawing
1 Open an image, copy the background layer, select Layer 1 copy to Filter - Blur - Gaussian blur (2.0 pixel)
2 Duplicate the background layer again, select copy the map Layer 2, the implementation of the filter - sketch - watercolor pen (20,60,80), the layer blending mode to darken.
3 Duplicate the background layer again, select Duplicate Layer 3,the true religion brand Alice Tsai, the foreground color set red, to Filter - Sketch - Sticky Notes (25,7,10), opacity is set to 30%.
4 Duplicate the background layer again, select Duplicate Layer 4, the foreground color set to black, foreground / background color set to black / white, and the implementation of the filter - sketch - copy (1,50), the Executive Levels adjustment (RGB, 157, .0,159), filled with the value of 30%.

simple way to do special photos
1 Open an image.
2 selected the blue channel in the channel, and then in the blue channel to Filter - Stylize - overexposed, you can point back to the RGB channel.

Matrix effects
1. Create a size of 500X300, RGB mode, the white background paper.
2. with a text input tool for channeling 01 randomly enter a code, press CTRL + T to its vertical Come put spin and pull into a multi-copy number ranging from small, casual place a few. Another method is to use filters, you can achieve very good results. is the menu - Filter - Texture - particles, the intensity and contrast are adjusted to 100, particle type selection vertically on it.
3. to those 01 code all the text layer and merge the background layer, and the foreground color R: 100, G: 255, B : 0 around the green, the background color set to black.
4 Select Menu - Filter - neon light effect, luminous size set to 10, brightness to 15.
5. Select Menu - Filter - Stylize - illuminate the edge, the edge width is set to 1, the brightness set to 20, about the smoothness set to 1.
6. Select the menu - Image - adjust - brightness / contrast, the brightness to -10, the contrast transfer to 60 or so

Ps film, it would be weird and interesting color comparison. If used in the MM portrait photograph, will make even filled with a decadent decadent avant-garde colors.
1 Open the image, and let the right shows .
2-channel control panel option in the blue channel, into the confirmed.
3-channel control panel option in the green channel into the confirmed.
4-channel control panel in the red channel selection into the into the 6-channel control panel in the green channel selection into the , 220, confirm.
7 election in the red channel access control panel, go to +20 to confirm.
9 control panel in the channel all the RGB channel selected, go to +15, confirm
this post from the Zhongguancun online digital photography forum: http://dcbbs.zol.com.cn/ , the post address: http://dcbbs.zol.com. cn/1/5_511.html
This tutorial introduces the pink color photo of the location method. general color process: first with the color tool to bring up the base color generally, and then gradually strengthen the need to highlight part of a single can if they feel appropriate to add some color complementary color.
1, open the original material, the color adjustment layer to create an optional parameter settings:
Red: 23 -22 38 -41
Yellow: 0 0 -26 0
2, create a new layer, fill color: # 450D7D, layer blending mode to layer, fill color: # 021D60, layer blending mode to . do: Filter> Fuzzy> Gaussian Blur with a value of 5, determined to blend mode to 90) determined the background and with a black brush to wipe out some people skin
6, copy the layer of the current layer, layer opacity to: 30%.
7, create a curve adjustment layer, a little a little brighter.
8, create a new layer, back layer. appropriate to the character under the skin mill, select the Dodge tool to figure painted face some of the high-light a little brighter.
9, to create a curve adjustment layers, adjustment of blue (top left half of cell, lower right half-cell) to determine and then create the brightness / contrast adjustment layer (0 6)
10, create a new layer fill color: # 021D60, layer blending modes to
12, triggered the lips with a pen section, click the appropriate feathering to create color balance adjustment layer, slightly a little brighter
13, to create the brightness / contrast adjustment layer (0 3)
14, create a curve adjustment layer (lower right half of the blue box).
15,coach bags outlet Beijing Times, create a Hue / Saturation adjustment layer (0 -5 0)
16, create a new layer, sealed layer. layer blending modes to change as >
1. Open the image, dragged into the sky material, the opacity set to 20%, and the solution map with the mask (this step can be omitted, but the big blank sky must add Oh)

2. a new layer, seal, execute channel mixing control operation, the blue channel value is set to 0,0,85

3. the implementation of the Hue / Saturation operation, the saturation values ​​down to -15

4. renderings found more gray, do the brightness / contrast operating
Brightness: -8 Contrast: 5

5. a new layer filled with white, the layer mode to Overlay , opacity set to 30%

6. copy the white layer and the layer mode to Soft Light and Opacity to 20%

7. create a new layer, set foreground color to white, foreground to transparent gradient with the figures from the sky stayed gradient

8. a new layer back layer, run the application image manipulation, data set as follows
channels: red color mixing: Hard Mix opacity: 8%

9. increase the effect of map layers, perform another Levels adjustment
Input Levels: 29 1.32 255
10. on the text, completed.

This tutorial describes common production method for color fading pictures. process is very simple, create a new layer or another color gradient, and then adjust the layer blending modes and layer opacity to. But in order to cope with this effect also need to add some decorative elements, such as stars and some fantastic decorating brushes. some people need a simple whitening and dermabrasion.
topaz filter and some brush commonly used on both the www.68ps.com download, Baidu search.
1, to form good habits. Copy a layer (ctrl + J), then copy the filter layers after the treatment, the paper applied to the Topaz filter, set the parameters as follows: sharp: 2.10, range: 1, brittle edges: 2.23, noise density: 1.57.
2, use rubber, and then add a mask to the layer of mask treatment: the need to use filters where a simple cleaning of rubber to achieve the effect you want. Here I am with the Ministry of minor changes only, avoiding too much to face the effects of post-filter.
3, add a color balance adjustment layer (-30, 26, 37)
4, add a rainbow gradient, transparency 75%, mode is set to: Soft Light (The Rainbow gradient what is it? is one of seven colors of the gradient, the gradient inside system to the one of, if not satisfied with the color can also be their new one, if not new, then please leave a message.)
5, the last is dotted, you can use your favorite brush lightly brush a few times, the key is to have the feeling of fantasy, which requires blur, the new one good brush pen Gaussian blur on this layer like a

1, open the original material, copy the layer of the background layer, the appropriate give figures resurfacing (dermabrasion thousands and thousands of ways to not elaborate, there are many online image processing software supporting, NIKON comes with that on the good, novice proposal Mito Xiu Xiu, lighting and the like, can quickly deal with skin, and then enter PHOTOSHOP regional processing.)
2, create a curves adjustment layer, adjustment of the red and blue (red micro-light, lighter shades of blue, simply means that the red curve on the side, blue or lower)
3, press Ctrl + Alt + ~ tune out the high-light selection, press Ctrl + Shift + I invert the selection, then create a curve adjustment layer, adjustment of blue (Input: 231 Output 249 this value to your under the curve will move out, but also do not understand, then say this is the upper left half of grid points, the lower half of the right end of grid)
4, create a new layer with white to transparent gradient out of the radial gradient , and then fill the layer to: 31%.
5, create a new layer, or with white gradient, the location is in the upper right corner of the screen to light that does not figure the direction of the layer filled with the following: 78 %.
6, creating an optional color adjustment layer, choose black, values ​​are: Yellow: -5 / White: -6 / Yellow: +7
7, create a color balance adjustment layer, select the high-light, Value: Yellow: -5, Red: +5, determined to complete the final results.

1, first open the original, and some defects on the skin to repair, to make a gradient map mediation layer, the color settings as shown in Figure This system comes with the color, the principle has been in the previous tutorial said, will not repeat it here, mixed color transparency 27%, followed by color and color balance to do the mediation layer, middle tone, 0 / +4 / -20 / not maintain the brightness, do this after step 2 to get the right pattern effect

2, complete the two steps above, you can choose to merge or not merge layers, I was doing when Lennon was a tutorial facilitate the capture of all the layers merged, we continue, a new blank layer, the default foreground color, set the Gradient tool as shown in the drawing a blank layer gradient, mixed-mode dimming, the severity of the opacity of the gradient, as you may be, The purpose of this step is to press hidden corners, then make adjustments Levels: 5/1.13/248, made a slight increase contrast for an end to temporarily step photo quality

3, merge, copy the background, color balance adjustments do not maintain the brightness,cheap vibram fivefingers, the middle notes: -19 / +16 / 0, as we continue to change the hair to retain details of the Blend Mode to Color, Curves shown in Figure (186.200/67.56) to change the opacity 60%, most students copy currency background, proper sharpening, change the canvas size of the layout, effect on the well in this case, this morning, said gradient map tool is mainly the use of value only for the purposes of this tutorial material

1, open the original material , according to background layer Ctrl + J to copy the layer, press Ctrl + M to adjust the curve, select layer opacity to: 58%. with a layer mask, black with a soft brush angle some very bright part of the rub. the purpose of this step operation is to lighten some of the layer.

3 , create a new layer, fill color: # 0d0537, layer blending mode to
Yellow: -68 5 31 -100
Green: 100 -100 5 100
Magenta: 6 0 1 100
White: 100 -18 20 0
neutral colors: 268-- 6 11
6, and then select the menu: Layer> New Adjustment Layer> Selective Color, parameter settings are as follows (remember must be relative):
Yellow: 25 13 -37 23
Green : -100 0 -100 100
7, select the menu: Layer> New Adjustment Layer> Color Balance, set parameters as follows:
Midtones: -11 1 18
check the Brightness (do corner vignetting effect)
10, willing to add the text you can add text, merge all layers, filters - sharpen-usm sharpening, the default value. finished, do not like the sharpening can not sharpening.

PS palette simple tutorial on using PS channel to transfer the pictures look great colors.
1, open the original image, select - image mode - lab color
2, into the channel in lab mode, select a channel (what is select a channel, many beginners do not understand this problem, an error led to the selection of the layer, the so-called select a channel that you want to use the mouse left-click the channel map layer, so that the channel has become the working channel), then hold down the ctrl left mouse button click on a channel marquee
3, select reverse (Ctrl + shift + I), and copy (Ctrl + C), choose b channel, hold down the ctrl click the left mouse button and then paste the marquee b channel (Ctrl + V) the image mode back to RGB color
4, image - apply image - channel (blue) - Mixed (brighter)
5, image - adjustment - Photo Filter - Dark Yellow - concentration - 15 - reserved brightness, color complete.

one. open the pictures, copy the background layer.
about to adjust the brightness curve about (his master), hue / saturation (+12, specific own hands, because no picture is exactly the same, to the effect of bright can be a)

II. the image mode to Lab mode (not flattened), the image - apply image (a channel, soft, 60%), then the image mode back to RGB

III. Finally , slightly adjust the picture parameters like color, so that a more harmonious color! (If you have already satisfied, you can not transfer), the merger is completed!
1, open the original material, creating an optional color adjustment layer, parameter settings are as follows:
Red: -2 -11 28 0
yellow: 0 -10 9 0
Green: 91 -18 -100 29
White: -19 -22 4 0
2, create an optional color adjustment layer, set the following parameters:
Green: 100 35 -30 0
Yellow: -7 0 49 0
3, create a curve adjustment layer, which provides bright. (to curve upward curve can be, otherwise it will result in overexposure)
4, create a new layer, fill color: # 5729CE, layer blending mode to br> 5, press Ctrl + Alt + ~ tune out the high-light selection, create a new layer filled with white
6, create a new layer, press Ctrl + Alt + Shift + E back layer, do: Filter> Fuzzy> Gaussian Blur with a value of 5, determined to blend mode to (Input: 230 Output: 255)
8, 8, create a new layer, press Ctrl + Alt + Shift + E back layer. do: Filter> Fuzzy> Gaussian Blur with a value of 5 After determining the blend mode to proper sharpening about to complete.