-
Ps The washing process is used to flush negative slides, it would be relatively strange and interesting colors. If the MM portrait photograph, will make even filled with a decadent decadent avant-garde colors.
1 Open the image, and let the right shows channel, into the channel, into the channel, into the Select like the panel selected the red channel, into the .
8 control panel in the channel all the RGB channel selected, go to all the RGB channel selected, go to
-
-
-1. the picture opens, find some form similar to the castle.
2. will be deducted from the house and put a new layer. You can use the Polygonal Lasso tool to select housing, and through a relatively soft eraser tool to erase the background.
3. now need a new background, from the material library to pick a
4. the sky into the rear of the house (air layer into the housing layer below), and add a little perspective distortion effects of the sky to increase the depth of the background.
5. observe the edge of the house, there still remain some of the original color of the sky above.
6. with the magic wand select the local housing floor space, and then do Select> Modify> Expand command to expand the range of options, enter an appropriate value of the selection to include the need for color correction house edge. Executive Image> Adjust> Hue / Saturation command to adjust the color of the edge of the roof the same color.
7. continue to use the Hue / Saturation to adjust the housing and the color of the sky to enable them to coordinate possible integration.
-1. Duplicate the layer blend mode to Screen,
2. Coated 2 eyes mask reverse clashes
3. back (alt + ctrl + shift + E)
4. channel mixtures, select the color, red +54, Green +54, Blue +32
6. Mixed Mode - are stacked
7. on the back layer to adjust the image - adjustment - Shadow / high light - Shadow: 50,50,144
high light: 0,50,30
Midtones: 20,0
0.01,0.01
-
1. Open the original image, copy the layer, the image - adjust - to color
2. filter - Artistic Effects - Plastic packaging, according to reduce the transparency of the original
3. adjust the black level color scale, is the picture black and white, Levels: 88,0.27,192
4.Ctrl + Alt + ~, high light extraction layer black and white constituencies, money becomes small eyes, hidden, back to the background layer,
5 . to the previous selection by adjusting the high-light curve, pulled the top of the curve, the effect came out
6. adjust the brightness contrast of the background layer, increase, or an appropriate adjustment to the color, brightness +4, contrast +7-
8. will have to remove the palm trees next to the house, with the copy stamp tool to copy the house to draw tiles between the part of the ground and first floor.
9. add to a bolt of lightning added to the screen tension. No feathering effect using the brush to draw a bolt of lightning, copied to a new layer, add the glow effect. Then use the Dodge tool to highlight the roots of lightning clouds.
10. using hand-drawn pictures or around the house to add some dead tree, remember to adjust the color and brightness.
11. To make the house look more worn, painted on the roof of a hole.
12. Continue to add the effect of damage. Broken beams and aqueduct, to break another roof and glass. To break things and then copy the stamp tool to use to fill the place vacated
13. Add some stains. First, the windows, with an irregular brush to add some variegated glass. Then change the layer blend mode stain it with a good glass can be mixed together. I used this tutorial brightness mode.
14. on the whole house to repeat the same steps, using a little deeper color and blend mode set to overlay mode. Attention to seams and edges, this place is the most prone to stains.
15. porch enlarged detail.
simple with photos came to light less than
1 Open the image, copy the background layer, change the background color filter layer pattern
2 对Background Levels adjustment layer
30 秒 get Plmm artistic photos
1 Open the image, copy the background layer twice
2 for reproducing the background layer a Gaussian Blur (radius 4 to 6) will copy the background layer to the second mode of light
3 new layer, add filling pattern (a semi pre-defined gray well and half white horizontal stripe pattern), set the blending mode to Multiply
image displacement effect
1 Open the picture, a new layer, select the View - the ruler, select the move tool, respectively, from the top and bottom drag out the two blue markings (9 cell)
2 Use the rectangle selection tool, fill the box (dark gray 1,9, 5,7 black, 3 light gray) to psd format, and then close the file
3 to Filter - distort - the replacement, select the save psd file
Notes (; black (color value = 255) is the largest positive displacement, that is the corresponding image pixel to the right and down; gray (color value = 128) did not produce displacement)
photo shading effects
1 Open the image, Select - Select All, then Edit - Copy, build a new channel, Edit - Paste to paste the copied images into the new channel]
2 implementation of the image - adjustment - Anti-like, back to the RGB channel, edit - remove, delete the original image
3 to Select - Load Selection, call the new channel, Executive Editor - fill (the color)
atomization
1 Open pictures, a new layer, set foreground / background color (black / white), to Filter - Render - Clouds, will add a layer mask layer
2 Repeat the filter - render - clouds, image - Adjust - Brightness / Contrast (80,0, a mode to color filter layer)
-
simple and easily sketch effect
-
7. establishing Levels adjustment layer, the first Ministry of dark and light general points out, the mask using the gradient tool to pull a black and white, black and white from the top right to bottom left corner of the gradient, to the right so far. Full channel 0,0.80,255
8. Add light, use the , the upper left corner a bit dark, so add a mask to wipe out the upper left corner. Points of light, strength: 28, Focus 52, gloss -100, materials 100, 17 exposure, environmental 32
9. Create a new layer back, look at light and dark contrast to enhance the establishment Levels adjustment layer in the mask gradient tool with black and white drawing, from the upper left to lower right corner of the black and white gradient, the upper right corner of the light is completely obscure the part of the mask with a white brush in the brush out, and then figure out from the mask in the brush. Levels all channels. Levels full channel: 0,0.80,255
10. Sharpening, a little dermabrasion, add the word to complete. -
1 Open the picture, do to the color, adjust brightness / contrast (brightness decrease / increase contrast).
2 Duplicate the background layer (Ctrl + J), select the background layer, the implementation of Filter - Style - find the edge, then the UXXXXX sharpening, then
layer mode to Overlay.
3 new layer, fill the white, add noise, then the motion blur, the layer mode to Multiply.
4 rubber tools (opacity to 15%), wipe some of the high light.
strokes drawn sketch effects
1 Open an image, copy the background Layer, Duplicate Layer 1 selected to Filter - Blur - Gaussian blur (2.0 pixel)
2 Duplicate the background layer again, select Duplicate Layer 2, the implementation of the filter - sketch - watercolor pen (20, 60,80), the layer blending mode to darken.
3 Duplicate the background layer again, select Duplicate Layer 3, the foreground color to red, to Filter - Sketch - Sticky Notes (25, 7,10), opacity set to 30%.
4 Duplicate the background layer again, select Duplicate Layer 4, the foreground color set to black, foreground / background color set to black / white, and the implementation of filters - Drawing - copy (1,50), the Executive Levels adjustment (RGB, 157, .0,159), filled with the value of 30%.
simple way to do special photos
1 Open an image .
2 selected the blue channel in the channel,
designer handbags uk, and then in the blue channel to Filter - Stylize - overexposed, you can point back to the RGB channel.
Matrix effects
1. create a new size of 500X300, RGB mode, white background paper.
2. with a text input tool channeling 01 random input code, press CTRL + T to put it over the vertical rotation and pull into the range of several multi-size copy , placed at random a few. Another method is to use filters, you can achieve very good results. Is the menu - Filter - Texture - particles, the intensity and contrast are adjusted to 100, particle type selection vertically on it.
3. To those 01 code all the text layer and merge the background layer, and the foreground color set to R: 100, G: 255, B: 0 or so green, the background color set to black.
4 Select Menu - Filter - neon light effect, luminous size set to 10, brightness to 15.
5. Select Menu - Filter - Stylize - light edge, the edge width is set to 1, the brightness set to 20, about the smoothness set to 1.
6. Select the menu - Image - Adjust - Brightness / Contrast , the brightness to -10, the contrast adjusted to 60 or so
-
1. Open the original image, copy the layer, the image - adjust - to color
2. filter - Artistic Effects - Plastic packaging, according to reduce the transparency of the original
3. adjust the black level color scale, is the picture black and white, Levels: 88,0.27,192
4.Ctrl + Alt + ~, high light extraction layer black and white constituencies, money becomes small eyes, hidden, back to the background layer,
5 . to the previous selection by adjusting the high-light curve,
tory burch sophie wedge, pulled the top of the curve, the effect came out
6. adjust the brightness contrast of the background layer, increase, or an appropriate adjustment to the color, brightness +4, contrast +7-
-
-
1. Select the blue channel
2. channel mixer, hook the
3. resurfacing, landscaping figure form.
4. to give people the skin and clothes with parameter default; use after the effect of blue, also need to use the
6. to the effect of step 6 are mixed mode to
8 ..
9. fine-tune the look or facial skin color, brightness, contrast, and some of the details.
10. produced as shown in the
12. to the
13. The -
8. again back
9. wipe away the right cheek with the stamp of the sun
10. with the Dodge tool - the range of high light intensity of 50%, given rise to the eye reflection, only rub the eye black,
14. for a long time less saturated red hue, or other fine-tuning to try
-
-
1. use the
2. using ctrl + I RP operation:
3. Levels using ctrl + L to adjust values for [145,1.5,160]
4. transferred into the general layer, after a new blank layer and fill it with black on the bottom.
5. using ctrl + T to free transform, the use of perspective.
6. duplicate this layer, and use the free transform the vertical flip.
7. align the two layers, and connect together.
8. use the Free Transform to adjust the zoom function of height.
9. use of color filter
a simple digital photo retouching
1 open late pictures, like the implementation of color / saturation (-40) to reduce saturation.
2 new layer, the layer mode to soft light, with the brush tool will need to polish the part of the painting several times, where you can easily extract the color palette used
3 pictures soft color transition is not enough, then about the implementation of the following Gaussian blur filter (+85)
1. Duplicate the layer, the overall provides bright, curved top right,
2. with a selection tool to circle the nose and nails, and then brightens with curves to highlight the nose and nails
3. color balance - high light - Levels: +8,0, -22
midtones - Levels: -10, +29, +27
Shadow - Levels: -2, -3, +14
4, can be Select Color - Red: 0, +1, +23, -29
Available colors - Yellow: 0,0, +4, +28
5. adjust the affected skin, a little pressure dark colors
6. with a curve to highlight the texture of the tank pressure of dark,
christian louboutin stilettos, black is the mask, the mask with an adjustment with a good general amend that
7. brighten the overall color, top right of the curve,
8. Finally is a modification of the lips,
9. add text -
1. into the channel panel, and then use the
Channel Green - Mixed Multiply, opacity 20%
channel red - mixed dark, opacity 100%
2. adjustments - color balance - high gloss - Levels: -8, +13, +11
3. blue channel during the first application image, layers: Background - Mixed: Multiply, Opacity 50%,
4. with curve adjust the brightness, move the top right of the red channel a little bit, br> All channels 6,0 and blue channels 4,15
5. Copy a layer copy of the out of the blue channel of the operation again, mixed Multiply, opacity 50%
6. The last thing is prominent figures, and with the eraser, given rise to some people, pay attention to the appropriate lower transparency. -
-
-
1 Open the image, copy the background layer, the implementation of the image - adjustment - Channel Mixer (Gray, +30, +60, +10, monochrome), to Filter - Stylize - Find edges, remove the noise
2 Levels of mixed mode to , +155) the implementation of form, color image Marxist
4 - adjustment - optional color, fine-tuning of color (red, 0, +100, +100, -75; yellow, 0, -40, +100, - 40)
old photos using the color overlay to add light and color effects
1 Open the image, copy the background layer, the implementation of the image - adjust - to color, adjust brightness / contrast (-42, +18)
2 add (brightness +100)
4 Duplicate the background layer, added again, Open the picture and copy of a In the copy of a to the selected processing hazy blue
artistic photos
1. copy an original layer (Ctrl + J).
2. on the replication layer uses Gaussian blur filter (+4.0) .
3. do color adjustments (+50,0, -64)
4. with a blurred edge eraser erase clear need for some.
5. the proper use layer blending modes.
create hazy in bright (landscape, ecological type)
1 Open the image, copy the layer.
2 copies of the layer blending mode to Sri Lanka fuzzy (+8.6 pixels). L
4 adjust color, like / Saturation (Ctrl + U) (0, +12,0).
5 add some sharpening, reducing transparency.
to add a glass effect pictures
1 selected area, press Ctrl + J
2 Gaussian blur on the shear layer (+3.1 pixels).
3 to adjust the color balance (-39, + 29, +16).
4 new layer. Choose the thickness of the glass area add a custom gradient filling (black and white gray, the order is dark, glossy, dark, high light), press Ctrl + T on the constituency to adjust the thickness of the glass.
5 filter - distort - Glass , select your favorite pattern (distortion, smoothness of 1, zoom 50%).
burning paper effect of the old photos - PS handling $
1 pure open a picture, the implementation of the image - adjustments - Hue / Saturation (+1, -58, +1).
2 image - adjustment - change (mid-tones, deeper yellow, deeper red highlights).
3 Duplicate the background layer, the implementation of filter Mirror - texture - particles (9,56, vertical).
4 new layer, to Filter - Render - Clouds.
5 and run the image - adjust - brightness / contrast (+27, +100 ).
6 with the Magic Wand, select one layer of black constituency.
7 off layer of a preview, click Copy the background layer, the foreground color to dark brown.
8 Select - Modify - Expand (5 pixels), select - Feather (5 pixels)
9 Edit - Fill (foreground), the selected layer one, with the magic wand select the black constituency
10 off the background layer and A preview of the layer, copy the background layer selected, Executive Editor - Clear.
11 images - the canvas size, height / width of one centimeter was increased, positioning (in).
12 opened the background layer Preview , select the background layer and fill the foreground color (light brown).
13 Duplicate the background layer selected, do Layer - Layer Style - projection. (positive end laminations, 45% opacity, angle 45, from 7 expand 2%, size 10).
14 merge all layers.
mottled effect of the other arts frame a new system of law
1 file by D key fill the background is white
2 Then, filters --- --- clouds rendering.
3 CTRL + M to adjust under the curve (high contrast black and white).
4 After completion of the effect of further next filter - distort - Glass (Distortion 7, 3, smoothness, texture - canvas, zoom 50%).
6 Create a new layer, the background is black, the other a new layer, add sufficient white rectangle.
7 layers in the implementation of the rectangle where the filter - distort - replacement, select the default option. Then find the newly saved PSD file can be replaced.
PS rendering the atmosphere of your photos (landscape)
1 Image - Adjust - Levels (RGB +29,1.0, +234). Form Color doctrine l2wvg.V 'T @ 4I
2 Executive Hue / Saturation command (full size -14, +41, -1).
3 continue to Hue / Saturation (red, hue values decrease,
tory burch eddie flat 久咳跟口腔溃疡偏方, saturation degree increase).
4 continue to Hue / Saturation (yellow, -22, +45, -1). www.swcool.commDZ-u
5 continue to Hue / Saturation (green, +15, 0,0).
6 adjust the brightness / contrast (brightness decrease / increase contrast). Xingse doctrine (H {T2P4ccN
-
1. New gray coating, with a curve to adjust the brightness, 152,124
2. cutout eyes and mouth, to be stressed,
3. reduce the overall saturation, saturation -56
4. with a color overlay to the overall color of the tendency,
5. hide the hue and color overlay layers, and open access panel, copy the R channel,
6. Create a new layer paste and adjust the transparency with a color filter pattern -
1. Create a new layer, filled with yellow, overlay mode, numerical 247,240,197
2. Copy just the yellow layer, Linear Burn mode, the mask given rise to the yellow car, avoid car color through yellow,
3. adjust brightness, contrast, high light part of the normal subject of color and exposure, brightness -20, contrast +64, the new adjustment layer saturation, saturation -31. to determine the final brightness of the daylight to high light at the color and detail prevail in the dark can be ignored,
4. Duplicate the background layer the shadow highlight adjustment, the best place to shadow detail as the base, shadow: the number 100, color width 33, radius of 102, high light: the number of 0, hue width 50, radius 30, to adjust: +20 color correction, contrast adjustment between 0 and 0.01% of the construction of black, white construction 0.01%
5. Duplicate the background layer to adjust the sky brightness, with the layer to make up the sky over exposure deficiencies,
6. tuning the details, to erase the sky wires, repair, Clone brush will do,
7. Flatten image,
asics gel foundation 8 review, fine-tuning the details, sharpness -
1. establish Hue Saturation adjustment layer, saturation -49,
2. to establish an optional color layer, red: -49,0, +7, -41. Yellow: 0,0 , 0, -23
3. to establish the Hue / Saturation layer, brightness -49
4. Colors. Yellow: 0,0,0, -26. White: 0,0, +46,0. Intermediate colors: 0,0, -6,0.
5. Optional color. Red: 0,0,0, -48. Black: 0,0, -47, +5. Transparency down to 37%
6. Stamped, noise reduction, sharpening, painting and simple to use tool to repair the knee near The spot,
7. plus hidden corners, making a heart-shaped selection, emergence, with the curve provides bright. -
-
1, this effect can be directly transferred with curves out over the whole channel is about 1 / 4 grid,
-105.125 green channel, blue channel 151.254
2. with lens correction to add black borders. Add Noise which Vignette - the number of -28 (dark), the focus +5,
3. with brush tool on the Internet under the pen of a scratch about in the above picture and then merge the layers
4. Add Noise, Quantity -2.45
5. to make a side -
-
People illustrator effects
1. Copy a layer into intelligent filter for the purpose of the filter effect can be adjusted
2. Filter - Render - Lighting Effects, all light sources, negative 17, Matte -25, plastic effect of 100, underexposure 32, negative 28,
3. New optional color adjustment layer, red: -100, -3,03,
ugg sheepskin boots 进来尝尝你的枪法吧～,0. Yellow: -59, -6, -23, +1. Green: +9 , +5, -100, +27. cyan: +8, -76, -3, -100. White: +1, -40, -73, -10. Intermediate colors: +16, -18, -18, -3. Black: 0,0,0, +28 -
1. buckle out of character, adjusting photo color, contrast and excessive attention to the photo did not make light of the legs in place need to be adjusted
2. adjustment of skin color, clothing color, mainly used to adjust the layer ,
north face thermal underwear, then add the background material, reflection, etc., pay attention to the feet point down the stretch with the Free Transform to adjust the deformation of drops
3. in the legs add a little high light, high light pen position outline, fill Gaussian white --- Fuzzy --- reduce transparency can also be filled with 50% gray pattern of the new soft layer --- --- Dodge tool used to draw roads lead to Rome, can easily reach the destination can
4 . material, the text with a click, the last sharpening can -
1. slightly adjust color cast, adjusting a rough tone, establish Levels Adjustment Layer, Levels all channels: 0,1.35,255. Levels of red channel: 0,0.85,255. Levels Green Channel: 0,1,10,255 Levels: 0,0.95,255
2. To establish the Hue / Saturation adjustment layer reduces the saturation of original, Full Figure saturation -30
3. to create a Photo Filter adjustment layer, the first step in the blue has come out with this step to deep yellow, the concentration of 25%, mode mode,
timberland field boots for cheap （精）寰球神秘事, the original place where the dark darker, choose the Channels palette, hold down the ctrl points of red channel, get back to photos selection populate the black mask filter.
4. to establish an optional layer of color adjustments, red: 100, -33,100, -40. Yellow: 0,0, -40,0. White: +15,0, +20, +20
5. The windows brighten the more, the establishment of the Hue / Saturation adjustment layer to part in the window and wipe. Hue 260, Saturation 25, Lightness +75
6. To create a color balance adjustment layer, to distinguish the characters and the surrounding environment, the set after the mask used in the large soft black brush to figure as the center angle rub a bit on it. Levels +20, +20, +40, select midtones
designer handbags uk Photos of 20 U.S. technology
Linear Mode
