,
エアマックス90
| Back to logs list
one, CAD graphics or tables copied to WORD, EXCEL steps -
1, change the CAD system variables WMFBKGND is OFF, the CAD background transparent,
Successive leaders group photo [ Figure ] - Qzone, -
If you want to copy in black and white graphics, which can be put in the Layer Manager layers color to white (7 );-
2, select the graphic you want to copy, use the
-
3, switch to the WORD or EXCEL, activation need to paste the area, and then select
-
4, paste the original results as shown; -
5,
エアマックス95, using the
-
6,
エアマックス2011, the effect of cutting and scaled as shown; -
7, such as graphics need to be modified, press the CAD Drawing to be modified to return to; -
EXCEL approach also copied to the above. -
Second, WORD, EXCEL graphs or tables copied to the CAD steps -
1, select the need to copy the graphic or table, use the
2, switch to the CAD program,
Too classic , who compiled the ~ !, and then select
3, select Paste as
-
4, choose Paste the insertion point,
血色青春, as shown after the effect of paste; -
-
5, lines or text after paste can be edited directly in the CAD, as shown below; -
-
to the Office to add a few
CAD: CAD map pasted into Word, Excel, PowerPoint,
エアマックス2010, Publisher can use this method. -
1, line width - the proposed multi-segment line to set the line width, because the width width width of only two post-paste, not pretty; -
2, the proportion of the problem - if possible, try to draw 1:1, where the ratio of 1:1 is printed, which is the need to print to 10mm,
air max,, -
graphics to draw into 10 units, both to control the map scale, but also can control the line width; -
3, the background color - 2002 in the layout of the space (the background of the general layout of the space is white) copy, 2004,2005,2006 copied directly on the line, no need to modify the background color. -
*兦*广州漂亮兼职小姐，广州俄罗斯小姐*兦*
he was surface
emancipationist
Hybrid Mode
