Windows 7 Serial Hack Attack Install Leopard on

Update : two : If you are searching for a manual to Dual Boot Windows Vista and Mac OSX Leopard, please stick to this guide Hack Assault : Dual Boot Leopard and Windows Vista. The Dual Boot Manual is often a extensive guidebook and it need to function for most of you with a small little bit of tough function.

Update : one : There's a more recent version of this Hack that you might need to take a look at. Its far more simpler and can be completed by practically every person. The newer hack also consists of Mac OSX ten.5.1 so please have a look at Hack Assault : Install Leopard On your own Personal computer in just 1 Stage.

Well its been only a day for the reason that Mac OSX Leopard was released officially by Apple and the hackers have managed to create a patched DVD that absolutely everyone like you and me can use to install Leopard on PC’s without having to buy a Mac. Please note the tutorial that I am going to post is still experimental and things may possibly not function the right way simply because it is still early days in hacking Leopard to operate on PC’s. Well if you don’t mind your Personal computer getting screwed then go ahead and try out this tutorial.
Make sure you backup all important data before you proceed. Here are the things that you simply will need before Set up Leopard on your PC…
The Patched DVD Image
The zip file containing the patch
1 pen drive or USB Flash Drive formatted as FAT32
Well once you have all these you can go ahead and Set up Leopard..
Stage 1. Getting things ready
Burn the DVD Image onto a Single Layer DVD-R using a software like Nero.
Format the USB Flash Drive as well as the drive label should be “Patcher” without the quotes. Make sure you note it has to be “Patcher” only and nothing else for the patch to perform when we apply it later.
Extract the Zip file and put its contents into the USB Flash Drive.
Now your USB Drive ought to contain a folder called “files”, if it doesn’t then examine to see where you have gone wrong.

Step two. Installing Leopard
Now that you have the Patched DVD with you,Windows 7 Ultimate Key, you can now install Leopard. Pop in the DVD into the drive and boot into it by pressing F12 at the BIOS Prompt.
Boot into the DVD along with the installer really should now load. It take a while though, so be patient.
Select your Language and make sure you select Customize and you need to deselect all the packages that are displayed.
Leopard will now install. This can take a while, so go grab yourself a coffee.
It will ask you to Reboot,Office 2010 Pro, so go ahead and Reboot. Before rebooting make sure that USB Flash Drive is connected to the Computer.

Phase 3. Patching Leopard
Now that you simply have got Leopard installed, you need to patch it. Before we do that Boot into the Leopard DVD like the way you did before.
Wait for the Darwin Bootloader to load. Once it loads up press F8. You ought to now see a prompt. Type -s and hit enter. The DVD will now load in Verbose mode. Watch for any errors. It really should load without a problem because you have already installed Leopard.
Once the setup is loaded select your Language. Once completed you ought to now be seeing the Welcome Screen. Once there navigate to Utilities-Terminal.
Once the terminal loads up,Windows 7 Serial, you now need to browse to your USB Drive,Office Professional Plus 2010, so comply with the steps below, typing it exactly as it appears below in the Terminal.
In the command line type the following as they appear here
cd ..
cd ..
cd Volumes
cd Patcher
cd files
Notice the space between cd and also the 2 dots.
Now its the time to run the patcher to make sure Leopard will perform on your Pc. Type the following into the Terminal.
./9a581PostPatch.sh
The Patch really should now run. You can answer Yes while removing the ACPUPowerManagement.kext
After the Script is completed, you ought to now be able to Boot into Leopard after you restart.

Stage 4. Congratulations! You’ve accomplished the Impossible!

Well that was it. Make sure you note this has not been extensively tested, so most of your Hardware like Sound,Office 2010 Standard Key, Network may not perform. If something goes wrong for you or you desire to help us, then please join the discussion over at OSX86Scene. In case you noticed I haven’t posted the links to the Torrent that contains the DVD image and the zip. Nicely I haven’t posted them because I am sure the lawyers over at Apple are going to sue the hell out of me. Should you wondering where you can find them, then head over to Demonoid and search for it.
Well here are few screenshots by Mac.nub over at the forums who could get Leopard working on his system.
Some Updates and Clarifications :
This Hack works on Intel PC’s with atleast SSE3
You need to format your Leopard Partition to HFS+
Make Sure you install Leopard on MBR and not GUID or it won’t boot.
A lot more Patched DVD’s from Uphuck, Netkas is in the works so it would be better in case you wait for the polished releases to come out.